Nortel Networks ICS 6.1 Time&Date, System prgrming, Hunt groups, Member DNs, Mode, Hunt delay

95

Time&Date	Use these commands to set the system clock to the correct time and date.
System prgrming	Use these commands to change system-wide settings.
• Hunt groups	These commands allow you to set up incoming calls on a specific DN to be
	routed to a group of sets.
•• Show group:_	Enter the DN of the telephone you want to program.
••• Member DNs	Enter the DN of the telephone you want to add to the group.
•• Line assignment	Assign or unassign a line to a particular hunt group.
•• Mode:	Determine how an incoming call will be handled by the hunt group.
•• Hunt delay:	Select a delay value to determine how long a set rings before the call moves
	on the next member set.
•• If busy:	Determine how an incoming call is to be treated when all hunt group member
	sets are busy.
•• Q Timeout:	Set the number of seconds the incoming call remains in the hunt group call
	queue before it is offered to the overflow position.
•• Overflow:	Enter the DN of the set you want the hunt group overflow calls to be
	presented.
•• Name:	Enter the name of the hunt group.
•• Aux ringer	Indicate if an external ringer will be used.
•• Distinct Ring	Use this setting to determine the Distinctive Ring Pattern you want to use to
	identify the Hunt group. This setting works in conjunction with Line and
	Telephone distinctive ring settings.
• Change DNs	Change the DN of a telephone.
	All DNs must be the same length.
	The first digit of a new DN cannot be the same as the:
	• external line access code
	• Call Park prefix
	• Direct-dial digit
	• first digit of a line pool access code
	If you change an individual DN, you must quit programming for the change to
	take effect.
• Featr settings	Use these commands to set or change features for specific sets.
•• Backgrnd music	Select whether users can listen to music through their telephone speaker
	using the Background Music feature (	°fl).
	A customer-supplied music source must be connected to the ICS.
•• On hold	Select whether a caller on hold hears:
	• music from an outside source, such as a radio connected to the ICS
	• periodic tones
	• silence
•• Receiver volume	Select whether the volume of a telephone receiver/headset automatically
	resets to the system default level, or retains the level set at the telephone.
•• Camp timeout	Select the number of seconds a call can remain camped before it returns to
	the telephone that camped it.
•• Park timeout	Select the number of seconds a call on an external line can remain parked
	before it returns to the telephone that	￿parked it.
P0603536 02			Modular ICS 6.1 Programming Record