Nortel Networks ICS 6.1 SchedNight, Service, Trunk Answer, ExtraDial, Line settings, SchedEvening

	91
•• Sched:Night	Select options for your ringing service.
••• Service	Select how you want your service activated.
••• Trunk Answer	Allow the telephone to answer incoming calls arriving at any telephone on the
	system.
••• ExtraDial	Enter the internal telephone number of the Extra-Dial telephone. This allows
	you to assign an additional Direct-dial telephone in the Norstar system for
	each schedule you use.
••• Line settings	Select ringing service options for each line.
•••• Show line:_	Enter the valid line number.
••••• Ring grp	Press change to enter the line number of each pre-defined ring group
	between 001 and 100.
••••• Aux. ringer	Indicate whether the auxiliary ringer (if installed) also rings for this line when
	Ringing service is on.
•• Sched:Evening	Enter the information for each of these settings as you have done for Night
•• Sched:Lunch	sched.
•• Sched:Sched 4
•• Sched:Sched 5
•• Sched:Sched 6
• Restrn service	Use these commands to select the method for activating alternate
	restrictions.
•• Sched:Night	Indicate how alternate call routing should be activated for each of the
	schedules.
••• Service	Select how you want your service activated.
•• Sched:Evening	Set up activation method for each of these settings, as you have with Night
•• Sched:Lunch	sched.
•• Sched:Sched 4
•• Sched:Sched 5
•• Sched:Sched 6
• Routing service	A programming section that allows you to create up to 500 destination codes
	and 999 routes to provide a dialing plan or for least cost routing.
•• Routes	Create the routes to be used when a destination code is dialed.
••• Show route:_	Enter the number of the route you want to create.
•••• DialOut	Enter the number, of up to 24 digits or characters, that you want this route to
	dial out, if required.
•••• Use	Select the line pool you want this route to use.

P0603536 02 Modular ICS 6.1 Programming Record