Nortel Networks ICS 6.1 Park mode, Trnsfr callbk, DRT to prime, DRT delay, Held reminder, Tone

96

•• Park mode	Select whether the system will use Call Park codes in a sequence from lowest
	to highest, or use the lowest numbered code that is available when the call is
	parked.
•• Trnsfr callbk	Select the number of times a transferred call rings before it returns to the
	telephone that transferred it.
•• DRT to prime	Select whether to automatically transfer unanswered external calls to a prime
	telephone.
•• DRT delay	Select the number of times a call rings before Delayed Ring Transfer
	transfers it to a prime telephone. This setting only appears if DRT to prime is
	Yes.
•• Held reminder	Select whether the telephone reminds you when a call is on hold.
•• Remind delay	Select the number of seconds before the telephone reminds you that a call is
	on hold. The setting only appears if Held reminder is Yes.
•• Directd pickup	Select whether users can answer calls at any telephone using the directed
	call pickup feature (	).
•• Page tone	Select whether users can hear a Page Announcement tone (		) over
	the system.
•• Page Timeout	Select the number of seconds before a Page is automatically disconnected.
•• Daylight time	Select whether daylight savings time is automatically applied to the system
	clock.
•• AutoTime&Date	Select whether time and day will automatically display.
•• SWCA Cntrl	This feature provides 16 feature codes which allow you to park calls on the
	system. If these codes are assigned to memory buttons with indicators in a
	group of telephones, then incoming calls can be assigned to the buttons and
	maintain a call appearance for the group, while freeing up the line for
	additional calls.
••• Auto Associate	Use this command to determine if calls are automatically assigned to a free
	SWCA key.
••• Invoke by Hold	Use this command to determine if calls are automatically assigned to a free
	SWCA key if they are put on Hold.
	￿	‡fl
•• Call log space	Customize how Call log	space is allocated to telephones in the system.
	￿fl‚
••• Reset all logs?	Use this command to confirm that you want to reallocate the Call log space
	equally to all telephones in your system.
•• Host delay	Select the delay, in milliseconds, between the selection of an outgoing line
	and the moment that Norstar sends dialed digits or codes on that line.
•• Link time
•• AlarmSet	Enter the DN of the telephone used to display alarm messages when a
	problem occurs in the Norstar system.
•• Set relocation	Select whether telephones in the system can be moved without losing their
	programming.
•• Msg reply enh	Select whether to provide light message waiting lamps or a stuttered dialtone
	on selected analog telephones on specially equipped ASMs.
•• Ans. key:	Allows you to assign up to eight answer keys. Settings are Basic, Enhanced,
	and Extended.

Modular ICS 6.1 Programming Record P0603536 02