103

•••• Protocol

•••• PrivNetId

••• Discon timer

Specify the duration of an Open Switch Interval for a Trunk Cartridge.

 

 

••• Answer timer

Select the minimum duration, in seconds, of an answer signal before a call is

 

considered to be answered, for an E&M trunk cartridge.

 

 

•• CO fail

Select the carrier failure standard used by your T1 service provider.

 

This setting only appears for DTIs.

 

 

•• I/F levels

Interface levels defaults to the ISDN loss plan setting.

 

Check with your telecommunications service provider to find out the I/F level

 

of your connection:

 

• digital network loss treatment (ISDN I/F levels)

 

• analog network loss treatment (PSTN I/F levels)

 

 

•• Framing

Use to select the framing format used by your T1 service provider.

 

This setting only appears for DTIs.

 

 

•• Internal CSU

Use to turn the internal TI channel service on or off.

 

The channel service unit gathers performance statistics for your T1 lines.

 

 

•• CSU line bld

Use to set the gain level of the transmitted signal.

 

This setting only appears for DTIs that have their internal CSU turned on.

 

 

•• DSX1 bld

Use to set the distance between the ICS and an external channel service unit.

 

This setting only appears for DTIs that have their internal CSU set to Off.

 

 

•• Line coding

Select the standard used by your T1 service provider for encoding signals on

 

the T1 lines.

 

 

•• ClockSrc

Determine the type of clock source.

 

 

••• Loops

View the loops on a BRI Card.

 

 

••• Loop nnn

View the settings for a particular loop on a BRI Card.

 

 

•••• Type

View or change the loop type.

 

 

•••• Sampling

Select the sampling used by an S-loop.

 

 

•••• DNs on Loop

Assign the ISDN DNs that use this loop.

 

 

••••• Assign DNs

Enter ISDN DNs for each S-loop or LT loop.

 

 

••••• Show DN:_

Indicate whether or not the DN is assigned to a loop.

 

 

••••• Loop DN:_

Select the main ISDN DN, if any, for the loop.

 

 

••• SPID1

Enter the SPID supplied by your service provider.

 

 

••• # of B-channls

Select the number of B-channels that are associated with the SPID.

 

 

••• Network DNs

Enter the Network DNs that are associated with the SPID.

 

A Network ISDN DN can be assigned to more than one SPID.

 

 

•••• Call type

Select the Call type used with the Network DN.

 

For each ISDN DN, use only one of each of the Voice and Data call type

 

settings, or a single Both call type setting.

 

 

P0603536 02

Modular ICS 6.1 Programming Record

Page 112
Image 112
Nortel Networks ICS 6.1 Protocol PrivNetId Discon timer, Answer timer, CO fail, Levels, Framing, Internal CSU, DSX1 bld