Nortel Networks ICS 6.1 Bypass restr’n, Passwords, COS pswds, Show pswd#, COS pswd #00, Pswd

94

••• Name	If you choose No for display digits, enter 16 characters to identify the person
	or location for a speed dial number. When the number is dialed, the telephone
	displays the name, not the number. If you want to use the alpha tagging
	feature, you must specify a name for the speed dial.
•• Bypass restr’n	Select whether a programmed system speed dial number can bypass
	restrictions programmed for a line and/or a telephone.
Passwords	Use these commands to assign passwords to restrict access to programming
	and system features.
• COS pswds	Create up to 100 six-digit passwords that control access and use of the
	Norstar system by internal and remote users.
•• Show pswd#:_	Enter the two-digit Class of Service password number (00-99).
•• COS pswd #00	Indicates the number of the password to which you are assigning information.
••• Pswd 00	Enter a six-digit password.
••• User flt	Assign a restriction filter to the Class of Service password.
••• Line flt	Select whether a Class of Service password will use the default line filter or a
	different line filter (enter the two-digit filter number).
••• Remote pkg	Select whether a Class of Service password will use the default remote
	package or a different remote package (enter the two-digit remote package
	number).
• Call log pswds	A programming section that allows you to clear any Call Log password
	programmed with the Call Log feature.
•• Show set:_	Enter the DN of the telephone you want to program.
••• Log pswd	Erase the call log password for this telephone.
• Programing pswds	In this section you can create your own password rather than use the default.
•• Installer	Enter the new installer password which gives you access all the programming
	settings.
•• SysCoord+	Enter the new system coordinator password which gives you access to
	selected programming settings.
•• Sys coord	Enter the new system coordinator password which gives you access to
	everyday programming settings.
•• Basic	Enter the new basic password which gives you access to the most commonly
	used programming settings.
• Reg pswd.	Enter the new registration password that allows you to register Companion
(MICS-XC only)	portable sets to the system.
• Hospitality	Use these commands to create Hospitality services passwords if required,
	rather than use the defaults.
•• Desk pswd	Enter the new Desk password which gives access to all Hospitality services
	programming settings.
•• Cond pswd	Enter a Condition password which gives certain employees access to the
	Room condition programming settings in Hospitality services.
• SM password	Enter the password that the supervisor using Silent Monitoring will enter.

Modular ICS 6.1 Programming Record P0603536 02