Preparation

Connecting to a Parallel or USB Interface

 

To connect the machine directly to your computer, use a parallel cable or

 

a USB cable.

 

IMPORTANT: Always power off the machine ({) and remove the power

 

cord from the outlet before connecting the printer cable.

1

Ensure your computer is also switched off.

Open the main power switch

cover on the right side of the

 

machine and press the Power

 

Switch to Off ({), then remove

 

the power cord from the outlet.

2

Connect the printer cable (not

included) to the Parallel Interface

Connector or USB Interface Connector located on the right side of the machine.

 

NOTE: Use a USB cable that complies with Revision 2.0 of USB

 

standard (a rectangular Type A plug and a square Type B plug).The USB

 

cable should be shielded and not be longer than 5 meters (16 feet).

3

 

Connect the other end of the printer cable to the Parallel Interface

Connector or USB Interface Connector on your computer.

BASIC OPERATION GUIDE

2-11

Page 43
Image 43
Olivetti 200MF, 250MF, 16MF user manual Connecting to a Parallel or USB Interface, Included to the Parallel Interface