Ppm model only | Olivetti 200MF, 250MF, 16MF manual

Troubleshooting

	Problem	Checkpoint	Procedure	Reference
	Problem	Checkpoint	Procedure	page
				page

	Black lines appear on	Is the slit glass dirty?	Clean the slit glass.	page 5-2
	copies when copying
	copies when copying		It is also possible to use the black line	Chapter 3,
	from the optional		It is also possible to use the black line	Chapter 3,
	from the optional		correction function to make any black	Advanced
	document processor.		correction function to make any black	Advanced
	document processor.		lines on the copies less apparent.	Operation
			lines on the copies less apparent.	Operation
				Guide

	Wrinkling occurs on	Is the separation needle	Clean the separation needle.	page 5-3
	copies.	dirty?

	Black or white vertical	Is the electrical charge	Open the front cover and use the	page 5-7
	lines appear on copies.	section dirty?	charger cleaner rod to clean the
			electrical charge section.

	White spots appear on	Is the transfer roller	Clean the transfer roller with the	page 5-4
	copies.	dirty?	cleaning brush.
	Copies are blurred.	Is the machine used at	Perform drum refresh.	Chapter 3,
	(25 ppm model only)	high humidity?		Advanced
				Operation
				Guide

	Printing cannot be	Is the power plug	Connect the plug to an AC outlet.	page 2-10
	performed.	connected to an AC
		outlet?

		Is the main power switch	Switch on the main power ( ).	page 2-12
		turned on?
		Is a proper printer cable	Connect the printer cable securely.	page 2-10
		connected securely?

		Was the printer cable	After connecting the printer cable,	page 2-12
		connected after the	switch on the main power ( ).
		machine was turned on?

		Is the machine offline?	• Press [Printer] to display the Printer	—
		Is the Ready indicator	Basic screen.
		off?	• Press S or T to select [GO] and
			• Press S or T to select [GO] and
			press [Enter].
			The Ready indicator displays.

	Correct characters are	Is a proper printer cable	Connect a shielded type printer cable.	page 2-10
	not printed.	connected?

	Printing is not performed	Is the setting on the	Check the setting of the printer driver or	—
	properly.	computer correct?	the application software.

6-4	BASIC OPERATION GUIDE

Image 100

Olivetti 200MF, 250MF, 16MF user manual Ppm model only

Contents

Page Publication Issued by Preset Zoom mode Refer to Split modeEdges Border Erase mode Making Full Use of Advanced Functions Language Setting Job Accounting mode Program functionPaper Feeder Duplex Unit Document Processor Legal and Safety Information Iii Legal and Safety Information Legal InformationCopyright Regarding Trade names Low Power Mode Auto Sleep ModeDuplex Mode Energy Star Program Symbols Safety ConventionsPaper Recycling Vii Label Viii Other Precautions Installation PrecautionsEnvironment Power Supply/Grounding the Machine Handling of Plastic Bags Precautions for Use Xii Xiii 20 ppm models Laser SafetyXiv Disconnection of Power CE Declaration of Conformity 89/336/EEC, 73/23/EEC and 93/68/EEC Legal and Safety Information Xvi Introduction Guides Included Conventions MeasurementsConvention Description Example Bracket Bold Text Basic Operation Guide Contents Maintenance TroubleshootingOptional Equipment Appendix Machine Parts Machine Parts Main BodyOriginal Cover Output Tray Operation Panel Cassette Basic Operation Guide 22 20 21 Operation Panel Basic Operation Guide Copier Basic Screen Message DisplayNumber To Network Settings, on Printer Basic ScreenReference Meaning Number Refer to , Advanced Operation Guide Preparation Loading Paper Prepare the PaperLoading Paper into a Cassette Preparation Using the Paper Length Adjusting Using the Paper Width AdjustingPlate Against the Paper Length Guide Loading Paper in the Multi-Bypass Tray Type or Size CapacityPostcard Transparencies Slide the paper along the Insert Multi-Bypass Tray Size and Type Paper SizeRegular Paper Size Press System Menu / Counter Other Regular Size Paper Type Input SizePress Enter. The Copier Basic screen returns Network Interface Connector on Connecting to a NetworkConnection Connector or USB Interface Connector on your computer Connecting to a Parallel or USB InterfaceIncluded to the Parallel Interface Connecting to Power Switching Power OnPower Cord Connector on Network Settings IP Address SettingRefer to , Advanced Operation Guide for details Press Printer IP Address Setting Subnet Mask SettingSubnet Mask Registering the Default Gateway Gateway Enter Pin Code using # key Setting the Date and TimeZone Summer time Other Settings Setting the LanguageFor details refer to , Advanced Operation Guide Basic Operation Basic Copying Procedure Ready to copyBasic Operation Open the Original Cover Image quality mode required Indicator light displays forSelected mode Copy Exposure can be adjusted Output Tray Making Zoom Copies Mode DescriptionAuto Zoom Auto% / 100% Zoom Mode Zoom118% Zoom Preset Zoom Mode 100% Duplex Mode Sided ¼ 2 sided Book ¼ 2 sided Duplex/Split Saddle Stitch Direction Left Side Top Side Stitch Direction required Sided ¼ 1 sided Split ModeBook ¼ 1 sided If 2 sided ¼ 1 sided is selected Original Stitch Side option Sort Mode Sort Interrupt Mode Interrupting CopyingInterrupt Copy Priority Output Interrupting Printing or Fax Select Interrupt mode displaysEnter Original, select the functions To perform a copying job, positionRequired and press Start Low Power Mode Auto Low PowerEnergy Saver Press Energy Saver to place Auto Sleep Mode Installing the Printer Driver Basic Printing ProcedurePrinting from Application Software KX Printer Driver Operation Guide Basic Operation Guide Optional Equipment Optional Equipment Overview Optional Equipment Document Processor Acceptable Originals Names of Parts Placing Originals in the Document Processor Important When copying Placing Originals on the Platen Paper Feeder Finisher Duplex UnitTray Capacity and Paper Sizes Using the Finisher Adding Staples Open the Stapler Front Cover Close the Stapler Front Cover Clearing a Staple JamTo Adding Staples, on Job Separator Stapler Front Cover Key Counter Inserting the Key Counter Fax Kit Network Scanner KitMemory Card CompactFlash Guide for the Network Scanner kit Text + Photo mode Hard DiskExpansion Memory 16 MB 32 MB 64 MB 128 MB Basic Operation Guide Maintenance Cleaning the Machine Cleaning the Platen, Original Cover and Document ProcessorMaintenance Or Document Processor Cleaning the Separation Needles Cleaning the Transfer Roller Replacing the Toner Container and Waste Toner Box Set toner containerOpen the Front Cover Waste Toner Box Maintenance Turn the Toner Container Release Toner ContainerUsed Waste Toner Box Important Do not use Fit the Grid Cleaner to the notch Install it into the machinePull out the Electrical Charge Turn the Toner Container Basic Operation Guide Troubleshooting Problem Solving Problem Checkpoint Procedure Reference Problem Checkpoint Procedure Ppm model only Error Messages and Correction Message Procedure Reference Representative or Authorized Service Center Contact your Service Representative or Authorized ServiceToner Container is empty Waste Toner Box is full Message Procedure Message Procedure Reference Message Procedure Jam Location Indicators Indicator Paper Jam Location Paper Jam Number ReferencePaper Jams Separator Cassette Cassettes 2 to Paper misfeed. Open left cover 2 and remove paper. JAM15 Inside the machine Multi-Bypass Tray Left CoverPaper misfeed in stack bypass. Remove paper. JAM10 Paper misfeed Paper misfeed in Eject Section Remove paper. JAM50 Paper Output SlotRemove any jammed paper Open the Left Cover Optional Document Processor Misfeed in DP Remove originals Optional Finisher Raise the Process Tray Remove the Finisher Tray Paper misfeed at Job Separator. Remove paper. JAM51 Optional Job SeparatorPaper Output Slot of the Job Pull up the Left Cover handle Basic Operation Guide Appendix Appendix-1 Specifications MachineAppendix Refer to Appendix , Advanced Operation Guide 20/25 ppm model 16ppm modelAppendix-3 Copier Appendix-4 × D × H 570 × 538 × 135 mm Weight Approx .4 lbs/7 kg Appendix-5 Duplex Unit Option Finisher OptionJob Separator Option Appendix-6 Environmental Specifications Appendix-7 Appendix Appendix-8 Numerics IndexIndex-1 Index Index-2 Index-3 Index-4 Memo 507010B ENG