Changing Power Save (Power Save)
If the recorder is on and stops for 10 minutes or longer (default), the display shuts off and it goes into power save mode. You can set the time to enter power save from among “5 min”, “10 min”, “30 min”, “1 hour”, and “Off”.
| 2 |
4 | 1 |
|
ChangingPower Save | 4 | |
3 | ||
| ||
| 6 | |
| 5 | |
78 |
|
1 While the recorder is stopped, press the MENU button for 1 second or longer.
The menu opens (☞ P91,93).
2 Press the + or – button to choose “Power Save”.
3 Press the OK or 9 button.
4 Press the + or – button to choose between “5 min”“10 min”“30 min”“1 hour”and “Off”.
If the power save mode is set to “OFF”, the recorder will not switch over to the power save mode. Leaving the recorder in such a condition will result in the rapid consumption of batteries.
5 Press the OK button to complete the setup screen.
If the 0 button is pressed, the setting will be canceled and it will return to the menu.
6 Press the STOP button to close the menu.
You can exit power save mode by pressing any button.
