1
HOLD
HOLD
If you bring the POWER/HOLD switch to the HOLD position, the current conditions will be preserved, and all buttons and switches will be disabled.This feature is useful when the recorder has to be carried in a bag or pocket.
Set the recorder to HOLD mode
Slide the POWER/HOLD switch
to the HOLD position.
After “Hold” appears on the display, the recorder is set to HOLD mode.
Exit HOLD mode
Slide the POWER/HOLD switch to the A position.
..................................................................................................................................................
Notes
•If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the recorder.
•If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state unchanged. (When playback has ended and the recording has ended due to the remaining memory being used up, it will stop.)
•Even if the recorder is in HOLD mode, operations using the remote control are still available.
16
