Manuals / Omega / Personal Care / Thermometer

Omega DP119-RTD manual Display, Environmental, Mechanical Dimensions, Power, Digital Inputs

Models: DP119-RTD

1 36

Download 36 pages 21.74 Kb

Page 31

DISPLAY

DISPLAY

Type:			7-segment, LED
Height:			0.56" (14.2 mm)
Symbols:			-1.8.8.8
Overrange Indication:			Three least-significant digits blank
Colors:			Red - standard
			Green - optional

DIGITAL INPUTS

Hold:......................................................................TTL or 5V CMOS compatible

ENVIRONMENTAL

Operating Temperature:	...............................................0¡ to 60¡C(32¡ to 140¡F)
Storage Temperature:	-40¡ to 85¡C (-40¡ to 185¡F)
Relative Humidity:	95% at 40¡C (non-condensing)

MECHANICAL DIMENSIONS

Bezel:	01.89Ó x 3.78" (48 x 96 mm)
Depth Behind the Bezel:	4.32" (110 mm) w/ connectors
Panel Cutout:	1/8 DIN: 01.72" H x 3.62" W (45 x 92 mm)
Weight:	8 ounces (227 grams)
Panel Thickness	minimum: 0.03" (0.76mm)
	maximum: 0.25" (6.25mm)
Case Material:	94V-1 UL-rated thermoplastic

POWER

AC Frequency:	50/60 Hz
Max. Power:	2.4 watts max.
AC Voltage:	115Vac ±15% 25mA max.
	230Vac ±15% 14mA max.
	100Vac ±15% 30mA max.
	24Vac ±15% 127mA max.
DC Voltage:	9-26 Vdc @ 110mA
External Fuse Protection needed:	32mA, 115Vac/230Vac
UL Slow-blow (per single unit)	40mA, 100Vac
	160mA, 24Vac
	125mA, 9-26Vdc
Installation Category:	I per EN61010
Equipment Class:	I per EN61010
Pollution Degree:	2 per EN61010
Refer to the Glossary in Section 6.

24

Image 31

Omega DP119-RTD manual Display, Environmental, Mechanical Dimensions, Power, Digital Inputs

Contents

UserÕs Guide DP119-RTDMiniature Panel ThermometerFor immediate technical or application assistance OMEGAnetSM On-Line ServiceInternet e-mail info@omega.com Servicing North AmericaSECTION TABLE OF CONTENTSPAGE Refer to Table 1-1 for the complete listing of models available RTD MODELS AVAILABLE RESOLUTIONPower Options Available MODELPOWER MODELS AVAILABLETYPE Other Models AvailableRESOLUTION MODELNOTES, WARNINGS and CAUTIONS QTY DESCRIPTION SECTION 1 INTRODUCTION 1.1 UNPACKINGcarton in the event reshipment is necessary Unpacking & Inspection 1.2 SAFETY CONSIDERATIONSEMC Considerations Figure 2-1 shows the panel thermometer SECTION 2 ABOUT THE METER 2.1 Front of the MeterFeatures Removable Screw-Clamp Cable Connector Display Hold CapabilitySignal Lo 2.3 Connector DescriptionConnector Description ConnectorSECTION 3 GETTING STARTED 3.1 Main Board Power Jumpers Voltage Jumper Pin Settings INSTALLAC VOLTAGE REMOVE3.2 Changing the Meter Parameters TABLE 3-1 Range Parameters TABLE 3-2 2-, 3-, 4-Wire, Upscale, Downscale ConfigurationThe following tables summarizes what parameters you can change Refer to Table 1-1, for complete models preface sectionSENSOR BREAK PROTECTION Section 3.3 Installation and Panel Mounting Figure 3-4. Installation Information 3.4 Sensor Input Connections 2-Wire RTD3-Wire RTD 4-Wire RTDFigure 3-6. 2-Wire RTD Wiring 3.4 Sensor Input Connections ContinuedNote Refer to Table 3-1 and Table 3-2 for internal jumper settings Wire colors are for OMEGA RTD wiring only3.5 Analog Output Connections 3.6 Display Hold Connections 3.7 Main Power Connections DC WIRING 3.8 Disassembly/Assembly PULL TAB HERE PC BOARD PUSH HERE 4.1 EQUIPMENT REQUIRED SECTION 4 OPERATION AND CALIBRATIONFigure 4-1. 2-Wire Configuration 4.2 CALIBRATION PROCEDUREFigure 4-2. 3-Wire Configuration METER CALIBRATION VALUES WHEN YOU ARE USING RESISTANCE SOURCEADJUST RESISTANCESECTION 5 SPECIFICATIONS ENVIRONMENTAL MECHANICAL DIMENSIONSPOWER DISPLAY0.76 3.76 95.5 4.32 109.7 MAX Figure 5-1 Dimensions1.89 48.0 BEZEL BACKPLATE CASE SIDE VIEW 3.78 96.0 TOP VIEWSECTION 6 GLOSSARY Page RETURN REQUESTS / INQUIRIES USAWARRANTY/DISCLAIMERFLOW/LEVEL TEMPERATUREOMEGAÉOf Course PRESSURE, STRAIN AND FORCE