|
| TABLE OF CONTENTS |
1 | GENERAL DESCRIPTION | 6 |
1.1 | Instrument codes | 7 |
1.2 | Specifications | 8 |
2 | GENERAL FEATURES | 9 |
2.1 | General | 9 |
2.2 | Optical System | 9 |
2.3 | Target pinpointing | 9 |
2.4 | Taking measurements | 9 |
2.5 | Keyboard | 10 |
2.6 | Display | 10 |
2.7 | Digital Interface | 10 |
2.8 | Self calibration | 10 |
2.9 | Thermocouple Input | 10 |
2.10 | Analog Output | 10 |
2.11 | Logging Mode | 11 |
2.12 | Calculated Measurements | 11 |
2.13 | Case | 11 |
2.14 | Logging Data Manager | 11 |
3 | PHYSICAL DESCRIPTION | 12 |
4 | FUNCTIONAL DESCRIPTION | 13 |
4.1 | Power supply | 13 |
4.2 | Keyboard | 13 |
4.3 | Microcontroller | 14 |
4.4 | Firmware | 14 |
4.5 | Display | 14 |
4.6 | Battery charger | 14 |
4.7 | Digital interface | 14 |
5 | UNPACKING | 15 |
6 | 16 | |
7 | POWER SUPPLY | 17 |
7.1 | Rechargeable batteries | 17 |
7.1.1 | How to maximize the life span of the battery | 17 |
7.2 | Power supply with alkaline batteries | 17 |
7.3 | Power supply from main line AC | 17 |
8 | WARNINGS & CAUTIONS | 18 |
8.1 | Laser Sight | 18 |
8.2 | Analogue input | 18 |
8.3 | Danger and Certification Labels | 18 |
9 | OPERATIONS | 20 |
9.1 | Quick Start | 20 |
9.2 | How to Operate the instrument | 20 |
9.3 | Hold | 21 |
9.4 | Laser sighting | 21 |
9.5 | Unstable temperature measurement | 22 |
9.6 | Alarm settings | 23 |
9.7 | Thermocouple input | 24 |
9.8 | Minimum, maximum, average and difference indication | 25 |
9.9 | Automatic Emissivity Setting | 26 |
10 | CONFIGURATION | 27 |
10.1 | Technical Unit selection | 27 |
10.2 | Thermocouple input enabled | 27 |
10.3 | Temperature Scale selection | 27 |
10.4 | Date & Real Time clock setting | 28 |
10.5 | Acquisition settings | 28 |
10.6 | Buzzer On/Off | 29 |
10.7 | OSP 500/800 decimal point selection | 29 |
10.8 | Ambient Temperature Compensation (TAM) | 29 |
10.9 | Firmware revision number | 30 |
10.10 | Instrument serial number | 30 |
10.11 | Battery level of charge | 31 |
4
