Toolbars | Omega OSP SERIES specification

12.2.1Toolbars

Additional tool bars menu appear when the data view window or the graph view window is selected.

Fig. 11.2a: Data view toolbar

Fig. 11.2b: Graph view toolbar

The following buttons are displayed on the toolbars.

View graph on actual data window

Pressing this button a new window, containing the graph of the active data table, is displayed.

Preference dialog

On preferences menu command you can set :

Instrument

-Tag name ( max 7 characters ).

-Emissivity ( from 0.10 to 1.00 ).

-Temperature scale ( IPTS 68 or ITS90 )

-Units ( °C, °F or K ).

-Decimal point ( 1 or 0.1 ).

-Alarms value and check box ( on/off ).

-Sampling time and total time of PC log.

Header Lines ( max 10 ).

Footer Lines ( max 10 ).

Print

-Top, header, left, right, bottom and footer distance in inches.

-Enable/Disable Grid and color.

-Enable/Disable Center table horizontally

Graph

- Autoscale or Lower and Upper Limits.

Select decimal point (0 or 1)

Select engineering units ( °C, °F or K ).

Enable/Disable alarms

Copy into a new file

Use this command to copy selected data onto a new file.

This command is unavailable if there are no data currently selected.

37

Image 37

Omega OSP SERIES manual Toolbars

Contents

OSP Series Portable IR thermometers OMEGAnetSM On-Line Service Internet e-mail Info@omega.com Introductory Note Table of Contents Data Acquisition Operative Mode General Description General featuresInnovative design Instrument codes Thermocouple measuring ranges Specifications General General FeaturesOptical System Target pinpointing Display KeyboardDigital Interface Self calibration Calculated Measurements Logging ModeCase Logging Data Manager Physical Description Functional Description Power supply Microcontroller Battery chargerFirmware Unpacking ΛEM = 10.6 ∝M PRE-OPERATIONAL Check How to maximize the life span of the battery Power SupplyPower supply with alkaline batteries Power supply from main line AC Analogue input Laser SightPage Operations How to Operate the instrumentQuick Start Trigger * MEM SEL Enter Laser sighting Hold Working band Weight Unstable temperature measurement Alarm settings HAL Minimum, maximum, average and difference indication Automatic Emissivity Setting Thermocouple input enabled ConfigurationTemperature Scale selection Technical Unit selection Acquisition settings Date & Real Time clock setting Buzzer On/Off Ambient Temperature Compensation TAMOSP 500/800 decimal point selection Actual Target Emissivity Ambient Temp Indicated Temp TAM Instrument serial number Firmware revision number Battery level of charge How to operate in data acquisition mode Data Acquisition Operative ModeAcquisition by dedicated Tags Log Recall stored data Logging Data Manager InstallationProgram Architecture Help FileData Edit Toolbars Copy into an open file Quick startingMove into a new file Move into an open file Press the or key to select the Tag a identification code Log Page Printer operations Options & AccessoriesSighting telescope system Installation of the sighting device Filter installationRed Point pinpointing system Part n DescriptionPage Infrared energy Application NotesApplications Emissivity Digital Interface Digital output wiring practiceTTL to RS 232 adapter Computer data request from OSP to PC Communication protocolComputer Reading values $00 Pyrometer measure Writing values Computer data setting from PC to OSP Example a Data transfer from OSP to PC Communication programsExample B PC instructions to OSP Example a 9Ø Chksum = DATA1 + DATA2 + DATA3 + DATA4 and &H7F Example B Faulty operating conditions MaintenanceStorage Err Appendix A1.1 Typical Emissivity Values A1 How to determine an object emissivity 14 µm A1.2 Metals Typical Emissivity Values A1.3 Non-metals Typical Emissivity Values Index Weight Working band WARRANTY/DISCLAIMER Temperature