OMEGA Model CYD201/CYD208 User’s Manual
CHAPTER 3
OPERATION
3.0GENERAL
This chapter covers the Units Key (Paragraph 3.1), the Channel key (Paragraph 3.2), Scan Mode (Paragraph 3.3), Setting Dwell Times (Paragraph 3.4), Alarm Operation (Paragraph 3.5), SoftCal™ Compensations (Paragraph 3.6), Calibration (Paragraph 3.7), Verifying SoftCal™ Operation (Paragraph 3.8), and Erasing SoftCal™ Compensations (Paragraph 3.9).
K °C | UNITS |
V °F |
|
ON |
|
OFF | CYD201 THERMOMETER |
Figure 3-1. Model CYD201 Front Panel
| K °C UNITS |
| V °F |
| CHANNEL |
ON |
|
OFF | CYD208 THERMOMETER |
Figure 3-2. Model CYD208 Front Panel
3.1UNITS KEY
UNITS selects different units of measurement. The thermometer reads in voltage or temperature (°C, °F, or K). Press UNITS to scroll through the various selections.
UNITS also determines if SoftCal™ is active. Press and hold UNITS for 3 seconds. If SoftCal™ is not active,
Operation |
