Omega Engineering CYD201 and CYD208 manual Model Description of Accessory, Din

OMEGA Model CYD201/CYD208 User’s Manual

ACCESSORIES (continued)

MODEL	DESCRIPTION OF ACCESSORY
	Sensor Probe. 12-foot (3.7 m) cable with CY-7-SD-13
	sensor in CY mounting adapter, stripped ends. Tempera-
2083-1	ture limit: 325 K (52 °C). Diode sensor epoxied (Stycast)
	into center of 0.564 inch (1.43 cm) diameter by 0.20 inch
	(5 mm) thick copper disk. 30 AWG copper leads anchored
	to disk. Mass (excluding leads): 4.3 grams.
	Sensor Probe. 12-foot (3.7 m) cable with CY-7-SD-13
	sensor in CY mounting adapter, with 4-pin CYD201-MC
	mating connector. Temperature limit: 325 K (52 °C). Diode
2083-2	sensor epoxied (Stycast) into center of 0.564 inch (1.43
	cm) diameter by 0.20 inch (5 mm) thick copper disk. 30
	AWG copper leads anchored to disk. Mass (excluding
	leads): 4.3 grams.
	Multi-Connector Adapter. Required with Model CYD208
2084	when using multiple probe/cable assemblies and Model
	201-MC mating connectors.
CYD208	Mounting Adapter for Rack Installation. For installation in
-DIN	a ¼ panel EIA rack space. See Figure 2-3.

6.2MODEL CYD201/CYD208 WIRES

LSCI P/N	DESCRIPTION OF CABLE
	Quad-Twist™ Cryogenic Wire. Two twisted pairs,
9001-005	phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
	diameter.
	Duo-Twist™ Cryogenic Wire. Single twisted pair,
9001-006	phosphor-bronze wire, 36 AWG, 0.127 mm (0.005 inch)
	diameter.
9001-007	Quad-Lead™ Cryogenic Wire . Phosphor-bronze wire,
	flat, 32 AWG, 0.203 mm (0.008 inch) diameter.
9001-008	Quad-Lead™ Cryogenic Wire . Phosphor-bronze wire,
	flat, 32 AWG, 0.127 mm (0.005 inch) diameter.
—	Any quality dual shield twisted pair wire for dewar to
	Model CYD201/CYD208 connector.

6-2 Options and Accessories