Omega Engineering CYD201 and CYD208 manual Chapter Options and Accessories

OMEGA Model CYD201/CYD208 User’s Manual

CHAPTER 6

OPTIONS AND ACCESSORIES

6.0GENERAL

This chapter lists options, accessories, sensors, wires, and special equipment available for the Model CYD201/CYD208.

6.1ACCESSORIES

MODEL	DESCRIPTION OF ACCESSORY
201-MC	4-pin Mating Connector for Model CYD201 and Model
	2084.
208-MC	36-pin “D” Style Connector for Model CYD208.
CYD200-J10	RJ-11 to RJ-11 Phone Cord, 10 feet (3 meters). See
	Figure 6-1.
CYD200-D	RJ-11 to DB-25 Adapter. Connects RJ-11 to RS-232C
	Serial Port on rear of computer. See Figure 6-1.
CYD200-B	RJ-11 to DE-9 Adapter. Connects RJ-11 to RS-232C
	Serial Port on rear of computer. See Figure 6-1.
2010	Model CYD201 calibration connector.
2080	Model CYD208 calibration connector.
	Screw Terminal Adapter. Connects Model CYD208 to
2081	multiple sensor/probe assemblies with stripped ends
	and non- permanent wiring. Provision for attachment to
	top of thermometer. Fitted with “D” type mating
	connector.
2082-1	Stainless steel Sensor Probe with 6-foot (1.83 m) cable
	with 4 stripped ends. 4-inch (10 cm) long by 1/8 inch
	(3.2 mm) diameter probe.
2082-2	Stainless steel Sensor Probe with 6-foot (1.83 m) cable
	with 4-pin 201-MC mating connector. 4-inch (10 cm)
	long by 1/8 inch (3.2 mm) diameter probe.
2082-3	Stainless steel Sensor Probe with 12-foot (3.7 m) cable
	with 4 stripped ends. 6-inch (15 cm) long by 1/8 inch
	(3.2 mm) diameter probe.
2082-4	Stainless steel Sensor Probe with 12-foot (3.7 m) cable
	with 4-pin 201-MC mating connector. 6-inch (15 cm)
	long by 1/8 inch (3.2 mm) diameter probe.

Options and Accessories 6-1