Onkyo DV-CP802 instruction manual Digital Out/Digital2 coaxial output, Linear PCM Out

Configuring the DV-CP802—Continued

■Digital Out

With this setting you can turn the OPTICAL DIGITAL AUDIO OUTPUT on or off. Depending on how you con- nect the DV-CP802 to your other components, this can be useful in certain situations.

On (default)

OPTICAL DIGITAL AUDIO OUTPUT is on.

Off

OPTICAL DIGITAL AUDIO OUTPUT is off.

Notes:

• This setting has no effect on the analog audio outputs.

Digital Out/Digital2 (coaxial output)

With these settings you can determine how the DV-CP802 outputs digital audio from its COAXIAL DIGITAL AUDIO OUTPUT. The options you choose will depend on the type of component that you connect.

■Dolby Digital Out

With this setting you can configure the COAXIAL DIG- ITAL AUDIO OUTPUT to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A con- verter.

■DTS Out

With this setting you can configure the COAXIAL DIG- ITAL AUDIO OUTPUT to output DTS audio as it is or to downmix it into 2-channel PCM.

DTS (default)

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

Notes:

•When playing the DTS audio of a DTS CD, set the CD Audio Setup setting to DTS (see page 55).

■MPEG Out

With this setting you can configure the COAXIAL DIG- ITAL AUDIO OUTPUT to output MPEG audio as it is or to downmix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

■Digital Out

With this setting you can turn the COAXIAL DIGITAL AUDIO OUTPUT on or off. Depending on how you con- nect the DV-CP802 to your other components, this can be useful in certain situations.

On (default)

COAXIAL DIGITAL AUDIO OUTPUT is on.

Off

COAXIAL DIGITAL AUDIO OUTPUT is off.

Notes:

• This setting has no effect on the analog audio outputs.

Linear PCM Out

DVD-V DVD-A VCD CD MP3

With this setting you can configure the DV-CP802 to output digital audio with a high sampling rate (e.g.,

96 kHz) as it is or to downsample it to 48 kHz. This set- ting applies to the OPTICAL and COAXIAL DIGITAL AUDIO OUTPUT.

Down Sample On

Choose this option if the component connected to a DIGITAL AUDIO OUTPUT doesn’t support high sampling rates.

Down Sample Off (default)

Choose this option if the connected component does support high sampling rates.

Notes:

•Some copy-protected DVD-Video discs may use

96 kHz digital audio only for A/D conversion to the analog audio outputs.

•With some discs, even if you select Down Sample Off, digital audio will be downsampled to 48 kHz regard- less, and in some cases, digital audio may not be out- put by the DV-CP802’s digital audio outputs.

51