Onkyo DV-CP802 Audio Menu, Progressive Setting, Digital Out/Digital1 optical output

Configuring the DV-CP802—Continued

Progressive Setting

With this setting you can adjust various picture parame- ters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range	Description
Contrast	–7...0...+7	Adjusts the picture
		contrast.
Brightness	–7...0...+7	Adjusts the picture
		brightness.
Color	–7...0...+7	Adjusts the picture color.
Tint	–7...0...+7	Adjusts the picture tint.
Sharpness	0...+7	Adjusts the picture
		sharpness.

1

Remote controller

ENTER

Select Progressive Setting 1, 2, or 3, and then press the [ENTER] or Right [ ] button.

The parameters appear onscreen.

2Use the Up and Down []/[ ] but-

Remote controller tons to select the parameters, press the [ENTER] button, and

use the Left and Right []/[ ] but- tons to set them.

ENTER

3When you’ve finished, press the

Remote controller [ENTER] button.

The settings are stored.

ENTER	Use the same procedure to set the other
	parameters, pressing the [ENTER] but-
	ton when you’ve set each one.
	Press the [SETUP] button to exit the
	onscreen setup menu.

Notes:

•These settings are used only when the Progressive function is on.

Audio Menu

Digital Out/Digital1 (optical output)

With these settings you can determine how the DV-CP802 outputs digital audio from its OPTICAL DIGITAL AUDIO OUTPUT. The options you choose will depend on the type of component that you connect.

■Dolby Digital Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output Dolby Digital audio as it is or to downmix it into 2-channel PCM.

Dolby Digital (default)

Choose this option if you’re connecting a component with a built-in Dolby Digital decoder.

Dolby Digital > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input, an AV receiver with a built- in Dolby Pro Logic decoder, or an external D/A con- verter.

■DTS Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output DTS audio as it is or to downmix it into 2-channel PCM.

DTS (default)

Choose this option if you’re connecting a component with a built-in DTS decoder.

DTS > PCM

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

■MPEG Out

With this setting you can configure the OPTICAL DIG- ITAL AUDIO OUTPUT to output MPEG audio as it is or to downmix it into 2-channel PCM.

MPEG

Choose this option if you’re connecting a component with a built-in MPEG decoder.

MPEG > PCM (default)

Choose this option if you’re connecting a stereo hi-fi amp with a digital input or an external D/A con- verter.

50