Onkyo instruction manual Turning On the DV-CP802 & First Time Setup, Use the Left and Right

Turning On the DV-CP802 & First Time Setup—Continued

3

Remote controller

ENTER

On the Analog Audio Out menu, use the Up and Down [ ]/[ ] buttons to select 2 Channel or Multi Channel (default), and then press [ENTER].

Choose 2 Channel if you’re connecting the FRONT AUDIO OUTs to a stereo amp.

Choose Multi Channel if you’re con- necting the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTs to a multichannel amp.

If you select 2 Channel, the setup is complete and the Initial Setup menu closes. If you select Multi Channel, continue with this procedure.

6 Use the Left and Right [ ]/[ ] Remote controller buttons to set the Front Speaker

setting, and then press the [ENTER] button.

	ENTER	Large: Select if the front speakers are
		large.
		Small (default): Select if the front
		speakers are small.
		Note that if the Subwoofer setting is set
		to Off, this setting is fixed at Large.
7		Use the Left and Right [ ]/[ ]

Remote controller buttons to set the Center Speaker setting, and then press the [ENTER] button.

4

Remote controller

ENTER

Press the [ENTER] button, use the Up and Down [ ]/[ ] but- tons to select On or Off, and then press the [ENTER] button.

Choose Off if your multichannel amp has its own speaker setup function.

Choose On if your multichannel amp has no speaker setup function.

If you select Off, the following settings cannot be set and the Initial Setup menu closes. If you select On, the Speaker Setting menu appears.

Here you can specify the size of the speakers being fed from the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs.

For speakers with a cone diameter larger than 6-1/2 inches (16 cm), spec- ify Large. For those with a smaller diameter, specify Small. See page 52 for more information.

	ENTER	Large: Select if the center speaker is
		large.
		Small (default): Select if the center
		speaker is small.
		Off: Select if no center speaker is being
		used.
		Note that if the Front Speaker Size is
		set to Small, the Large option cannot be
		selected.
8		Use the Left and Right [ ]/[ ]

Remote controller buttons to set the Surround Speaker setting, and then press the [ENTER] button.

ENTER	Large: Select if the surround speakers
	are large.
	Small (default): Select if the surround
	speakers are small.
	Off: Select if no surround speakers are
	being used.
	The Initial Setup menu closes and the
	setup is complete.
	The DV-CP802 is now ready for use.
	See page 23 for information on loading
	discs, and page 24 for information on
	selecting and playing discs.

Notes:

5

Remote controller

ENTER

Press the [ENTER] button, use the Left and Right []/[ ] but- tons to set the Subwoofer set- ting, and then press [ENTER] again.

Off: Select if no subwoofer is being used.

On (default): Select if a subwoofer is being used.

•You can change the language of the onscreen setup menus, and your preferred languages for DVD menus, foreign language soundtracks, and subtitles on the Language page of the onscreen setup menus (see page 56).

•When a DVD doesn’t have menus, soundtracks, and subtitles in various languages, its default language is used.

22