Onkyo DV-CP802 instruction manual Setting the Speaker Distances

Configuring the DV-CP802—Continued

3	Use the Up and Down [		]/[	]
Remote controller	buttons to select Front Speaker,
	press the [ENTER] button, use
	the Left and Right [	]/[	] but-
	tons to select an option, and then
ENTER	press [ENTER] again.
	When setting the
	Speaker Setting, for
	speakers with a
	cone diameter
	larger than 6-1/2
	inches (16 cm),	Cone diameter
	specify Large. For
	those with a smaller
	diameter, specify Small. If you’re using
	THX-certified speakers, specify Small
	for all speakers.
	Large: Select if the front speakers are
	large.
	Small (default): Select if the front
	speakers are small.
	Note that if the Subwoofer setting is set
	to Off, this setting is fixed at Large.
4	Use the Up and Down [		]/[	]
Remote controller	buttons to select Center Speaker,
	press the [ENTER] button, use
	the Left and Right [	]/[	] but-
	tons to select an option, and then

ENTER	press [ENTER] again.
	Large: Select if the center speaker is
	large.
	Small (default): Select if the center
	speaker is small.
	Off: Select if no center speaker is being
	used.
	Note that if the Front Speaker setting is
	set to Small, the Large option cannot be
	selected. And if the Subwoofer setting
	is set to Off, only the Large and Off
	options can be selected.

6When you’ve finished, press the [SETUP] button to exit setup, or

Remote controller press the Left [] button repeat-

SETUP	edly to go back to the main setup
	menu.

Setting the Speaker Distances

1	Use the Up and Down [	]/[	]
Remote controller	buttons to select Speaker Dis-
	tance, press the [ENTER] button,
	use the Up and Down [	]/[	]

buttons to select On, and then

ENTER	press [ENTER] again.
	When the Speaker Distance is set to
	Off, these settings cannot be selected.

2	Use the Up and Down [	]/[ ]
Remote controller	buttons to select a speaker,
	press the [ENTER] button, use
	the Left and Right [ ]/[	] but-
	tons to specify the distance from
ENTER	that speaker to the listening posi-
	tion, and then press [ENTER]
	again.
	Repeat for each speaker.
	Speaker distances can be specified in
	steps of 1.0 ft.

5

Remote controller

ENTER

Use the Up and Down [ ]/[ ] buttons to select Surround Speaker, press the [ENTER] but- ton, use the Left and Right [ ]/ [ ] buttons to select an option, and then press [ENTER] again.

Large: Select if the surround speakers are large.

Small (default): Select if the surround speakers are small.

Off: Select if no surround speakers are being used.

If the Subwoofer setting is set to Off, only the Large and Off options can be selected.

Speaker	Range	Default
Front Left
Center		12 ft.
Front Right
	1.0–30.0 ft.
Surround
Right		7.0 ft.
Surround Left
Subwoofer		12 ft.

Notes:

•If the distance between the furthest and nearest speakers is greater than 20 feet, corrected values suitable for home theater use will be set automat- ically.

53