Onkyo DV-CP802 instruction manual Interlaced Setting

Configuring the DV-CP802—Continued

		A-B
4	5	6
		RANDOM
7	8	9
		DISPLAY
+10	0	CLEAR
TOP MENU		MENU

ENTER
/		ENTER
	RETURN	SETUP
		SETUP
	AUDIO	ANGLE SUBTITLE
	DISC 1	DISC 2 DISC 3 STEP/SLOW

Interlaced Setting

With this setting you can adjust various picture parame- ters for interlaced scanning. There are three setup mem- ories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down).

Parameter	Range	Description
Blacker than	Off, On	Makes black objects look
black	(default)	even blacker.
Contrast	–7...0...+7	Adjusts the picture
		contrast.
Brightness	–7...0...+7	Adjusts the picture
		brightness.
Color	–7...0...+7	Adjusts the picture color.
Tint	–7...0...+7	Adjusts the picture tint.
Sharpness	–6...0...+6	Adjusts the picture
		sharpness.
S, Composite	Dark,	Adjusts the black level
	Normal	for the S-Video and
Video
	(default)	composite video outputs.
Component	Dark	Adjusts the black level
	(default),	for the component video
Video
	Light	outputs.
Gamma	–7...0...+7	Adjusts the brightness of
		darker colors.
Y/C Time	–4, –2, 0,	Corrects small shifts in
Correction	+2, +4	color.
DNR	Off (default),
(Digital Noise		Reduces picture noise.1
	1, 2, 3
Reduction)

1.The effect may not always be noticeable, and depending on the video source, the picture may look better with it set to Off.

1

Remote controller

ENTER

Select Interlaced Setting 1, 2, or 3, and then press the [ENTER] or Right [ ] button.

The parameters appear onscreen.

2Use the Up and Down []/[ ] but-

Remote controller	tons to select the parameters,
	press the [ENTER] button, and
	use the Left and Right [ ]/[ ] but-
ENTER	tons to set them.

3When you’ve finished, press the

[ENTER] button.

Remote controller

The settings are stored.

ENTER	Use the same procedure to set the other
	parameters, pressing the [ENTER] but-
	ton when you’ve set each one.
	Press the [SETUP] button to exit the
	onscreen setup menu.

Notes:

•These settings are used only when the Progressive function is off.

49