Onkyo FR-N3X Understanding preparatory and common operations, ◆Selecting a source, ◆Adjusting the volume, ◆Turning the unit on and off

Understanding preparatory and common operations

This section explains the following preparatory and common operations: turning the unit on and off, selecting a source, adjusting the volume, etc.

	STANDBY/	INPUT buttons
Source selector buttons	ON

VOLUME

STANDBY/ON

STANDBY indicator

VOLUME

/

◆Turning the unit on and off

Press STANDBY/ON on the unit or on the remote con- troller.

If you press the same button again, the unit will turn off and enter standby mode.

◆Adjusting the volume

Operating with the unit

Turn VOLUME clockwise to increase the volume and counterclockwise to decrease the volume.

The FR-N3X has the following two power modes.

Standby mode: The display remains turned off (see page 11).

Power On mode: The FR-N3X enters Power On mode when you press the STANDBY/ON button on the unit or remote controller while the unit is in Standby mode. The FR-N3X operates normally in this mode.

Using the remote controller

Press VOLUME / on the remote controller.

◆Selecting a source

You can select CD, MD, FM, AM, or connected external audio/video equipment (LINE and CD-R) as the audio source.

Tip!

When you start playing (or turn on the power to) an Onkyo CD recorder or cassette tape deck that is con-

nected to the FR-N3X via an cable and audio pin cables, the power to the FR-N3X is automatically turned on. Also, if you turn on or off the power to the FR-N3X, the power to such a device is automatically turned on or off (standby).

Operating with the unit and remote controller

Buttons	Usage
CD/MD	Press this button to toggle between
	CD and MD.
FM/AM	Press this button to toggle between
	FM and AM.
OTHER INPUTS	Press this button to select LINE or
	CD-R.

16