Setting the day of the week and the time

You can select either the 12-hour or 24-hour display. (This section explains how to set the time based on the 12-hour display.)

1

2

3

4

5

DISPLAY

1

Press TIMER repeatedly until “Clock” appears in the display.

Press MULTI JOG.

You can now set the day of the week. If you prefer the 12-hour display, press

DISPLAY.

Turn MULTI JOG to select the current day of the week.

Press MULTI JOG to confirm the setting.

You can now set the time.

Turn MULTI JOG to set the current time. (This example shows the 24-hour display.)

2-6

EDIT/

CLEAR/NO

6

 

Press MULTI JOG in sync with

 

 

 

the time signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The clock starts operating and a dot indicating seconds starts to flash.

To cancel the clock setting

Press EDIT/CLEAR/NO.

◆Checking the time and the day of the week

To check the time and the day of the week, press CLOCK CALL on the remote controller. To switch between the 12-hour and 24-hour displays, press DISPLAY while the current time is indicated on the dis- play.

CLOCK CALL

To display the current time while the unit is in Standby mode, first turn on the power to the unit, then press and hold down the STANDBY/ON button for more than two seconds.

To cancel the current time indication, press and hold down the STANDBY/ON button for more than two seconds while the power is on.

If the unit displays the current time during Standby mode, standby power consumption will increase.

17