Naming an MD and its tracks, and preset channels
•You can enter up to 100 alphabetical characters per name.
•Use a recordable MD with the
1Insert the MD, then select MD as the source.
2To name the disc, proceed to Step 3. To name a track, select the track.
3Execute “Entering a name” as described in the right column.
◆Naming a group on an MD1Insert the MD, then select MD as the source.
2Press the GROUP button, then turn MULTI JOG to select a group.
3Follow the steps described in the “Entering a name” section in the right column.
Notes
•If the MD is
•Before naming the disc, check that no particular track is selected. If a track is selected, press MD 
.
•You can name a track during recording or playback. How- ever, if recording or playback of the next track starts, the naming process may not be completed correctly.
•If the MEM, RDM, 1TR, or 1GR indicator is lit, you cannot name the disc.
“MD” indicator
•Information such as names will be recorded to the TOC of the MD when you eject the MD, turn off the unit, or stop recording. Therefore, do not disconnect the AC power cord (mains lead) or vibrate the unit when the TOC indi- cator is lit or flashing. (See page 36.)
◆Naming a preset channelAfter you select the preset channel to name, execute “Entering a name” as described in the right column.
You can enter up to eight characters per name.
| 3 |
| 1, 2, 4 |
| 5 |
| 1 |
1 | Press EDIT/CLEAR/NO and turn |
| MULTI JOG until “Name In?” |
| appears in the display. |
2 | Press MULTI JOG. |
3 | Press DISPLAY repeatedly until |
| the character type you wish to |
| enter appears in the display. |
| |
|
You can select one of the following character entry modes:
•“A” for capital letters
•“a” for small letters
•“1” for numbers and symbols
•“” for Easy Name* (see next page).
* This mode cannot be selected when you are naming a preset channel.
The character type appears.
52