Recording CD to MD (Synchro recording)

After you select songs, this function enables you to edit and record the songs.

1

5

3

6

1

2

3

Insert a CD and an MD.

Tip!

See Step 1 of “Playing a CD” on page 20.

If “MD Reading” appears on the

See Step 1 of “Playing an MD” on page 22.

MD information display, you can-

Use a recordable MD.

not perform Synchro recording.

 

Check the necessary recording time.

 

Refer to Step 2 on page 27.

 

Press CD/MD repeatedly to display “CD.”

 

4

5

Select digital or analog recording.

See “Selecting digital or analog recording from CD to MD” on page 37.

Press REC to set the FR-N3X in recording

Turning Level Sync on or

standby mode.

off

Adjusting the recording level. See the next page.

See “Numbering the songs —

Level Sync” on page 39.

 

6

CD

Play the CD.

Numbering the desired song(s)

Press REC during recording of the desired song. If you do not hold down REC long enough (about four seconds or less), the song may not be numbered.

Dubbing another CD

Press CD to stop playback, and replace the CD with another one. The MD recorder enters recording standby mode.

When the end of the MD is reached, the recording automatically stops.

Tip!

During recording, you can check the elapsed time and remaining time on the MD using DISPLAY.

Selecting a song after pausing the CD

The MD also enters recording stand-by mode.

Use / on the remote controller or MULTI JOG on the main unit to select a song on the CD, then press CD / or the remote controller’s . The MD resumes recording.

Checking the recording result

See page 27.

31