Onkyo FR-N3X Moving, dividing, combining, and erasing MD tracks, ◆Five basic functions, ◆Combining basic functions, ◆Erasing all tracks on an MD – All Erase

Moving, dividing, combining, and erasing MD tracks

◆Five basic functions

•	All Erase
	This function erases all the tracks and names to ini-
	tialize the MD. (“Blank Disc” is displayed.)
•	Erase
	This function erases the selected track.

◆Erasing all tracks on an MD – All Erase

•You can execute this function only when the input source is MD and an MD is stopped.

•To cancel the operation, press MD .

•	Move
	This function moves the selected track to the
	desired position.
•	Divide
	This function divides the selected track.
•	Combine
	This function combines the selected track and the
	immediately preceding track.

◆Combining basic functions

1

1

2-4

2

Erasing part of a track – Divide and Erase

Divide the track at the end or beginning of the portion you wish to erase. If necessary, repeat this operation to separate an unwanted portion.

Then, erase the separated track.

Combining separately positioned tracks – Move and Combine

If the tracks you want to combine are in different loca- tions, move the track to be merged to a position following the other track, then combine them.

Notes on combining tracks

•You cannot combine a digital recording track and an analog recording track. (If you try, “Impossible” will appear on the display.)

•You cannot combine tracks recorded in different recording modes. You can combine only tracks recorded in the same recording mode. (For exam- ple, a track recorded in MONO mode cannot be combined with a track recorded in LP2 mode.)

Notes

•Information about the edited or erased contents is recorded to the TOC of the MD when you eject the MD, turn off the unit, or stop recording. Therefore, do not disconnect the AC power cord (mains lead) or vibrate the unit when the TOC indicator is lit or flashing (see page 36).

•If the MEM, RDM, 1TR, or 1GR indicator is lit in the display, you cannot edit or erase any tracks. In such cases, cancel the MEMORY, RANDOM, 1TR, and 1GR playback mode (see page 42) before starting the operation.

•If you edit an MD that has a group, the group infor- mation may be modified.

1	Insert the MD, then select MD as
	the source.
	Use a recordable MD with the record-
	protect tab closed.
2	Press EDIT/CLEAR/NO and turn
	MULTI JOG until “All Erase?”
	appears in the display.

3 Press MULTI JOG.

The confirmation message “All

Erase??” appears in the display.

4	Press MULTI JOG to erase all
	tracks.

“Complete” appears in the display. All tracks on the MD have been erased.

(Continued on the next page)

55