Onkyo FR-N3X 3, 4, ◆ Dividing a selected track – Divide

Moving, dividing, combining, and erasing MD tracks (continued)

◆ Dividing a selected track – Divide 6

• You can execute this function only when the input source is MD and an MD is playing or paused.

• If a selected track has a name (see page 52), the first part will retain the name after the track is divided.

•To cancel the operation, press MD .

3, 4 1

2, 5-8

5

/ 7

1	Insert the MD, then select MD as
	the source.
	Use a recordable MD with the record-
	protect tab closed.
2	Turn MULTI JOG to select the
	track to divide.
	You may press	to fast forward or
	to fast reverse on the remote controller		8
	to help locate the desired dividing-point.

3	Press MD /	.
	Playback starts.

4	Press MD /	at the desired
	dividing.
	The MD pauses.
5	Press EDIT/CLEAR/NO and turn
	MULTI JOG until “Divide?”
	appears in the display.

Press MULTI JOG.

“Rehearsal” and “Position OK?” appear alternatively and an approximately four- second section around the dividing point will be played repeatedly.

Approximately four

seconds rehearsal play

The dividing point

If necessary, turn MULTI JOG to fine tune the dividing point.

You may adjust the dividing point between the values of –45 and +45 (or approx. +/–3 seconds in SP mode) within the selected track.

Approximate four sec-

onds rehearsal play

+/– 45 steps The dividing

point

Press MULTI JOG to divide.

“Complete” appears in the display.

The selected track is divided and all the tracks are renumbered from the top.

Dividing a selected track

1		2		3	4
1				3	4
Renumbering the tracks
1	2		3	4	5

58