Do not use the same antenna for both FM and TV (or VCR) reception since these signals may interfere with each other. If you must use a common FM/TV (or VCR) antenna, use a directional linkage type splitter.
Directional Iinkage type splitter
To | To TV (or VCR) |
Assembling the AM loop antenna
Assemble the loop antenna as shown in the following illustration.
Insert into the hole.
Connecting the AM antenna cable
1. Press down | 2. Insert the | 3. Release the |
the lever. | wire into | lever to lock |
| the hole. | the wire in |
|
| place. |
Connecting the AM loop antenna
The AM loop antenna is for indoor use only. Set it in the direction and position in which you receive the clearest sound. Locate it as far as possible away from this unit, televisions, speaker cables, and power cords.
Connecting an AM outdoor antenna
When reception is not satisfactory with the supplied AM loop antenna alone, an outdoor antenna is recom- mended.
The outdoor antenna will be more effective if it is stretched horizontally above or outside a window.
•Do not remove the AM loop antenna.
•To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 14 of the “Important Safeguards” on page 3 when you install the outdoor antenna.
outdoor antenna
(Continued on the next page)
7