Onkyo FR-N3X NO, NO, NO, ◆Connecting a subwoofer, Antenna (aerial) and speakers (continued)

Antenna (aerial) and speakers (continued)

1	2	3	1	10mm
			Peel the insulation
			to expose about
			10mm of the core
			wire.
Push down	Insert the tip	Release the	2
the lever.	of the	lever to replace
	speaker	it.
	cable.		Twist the core
		– +	wire.
			– +
		Right	Left
		speaker	speaker

Notes

•Connecting the left and right speakers reversely or with incorrect polarities can cause unnatural or distorted sound.

•The load impedance of each speaker must be between 4 and 16 ohms. Connecting speakers with less than 4 ohms imped- ance could damage the amplifier.

•To prevent damage to circuits, never short-circuit the positive (+) and negative (–) speaker wires.

NO!

• Do not connect the speaker cord to the L and R connec-	(example 1)		(example 2)
tors at the same time (example 1). Do not connect more
		NO!		NO!
than two speaker connectors to the same speaker (exam-
ple 2).

◆Connecting a subwoofer

The FR-N3X has a SUBWOOFER PRE OUT jack. Connect an active subwoofer (a subwoofer that contains an amplifier), or connect an amplifier to the FR-N3X, then connect a non-active subwoofer to the amplifier.

Active subwoofer

(with a built-in amplifier)

FR-N3X

Subwoofer
(without a built-in amplifier)	Amplifier

: Signal flow

8