Programming FM stations automatically — Auto Preset
Auto presets store the frequencies of radio stations into memory so you can select your favorite channels without tuning manually. Radio station signals can be automatically located and stored. This function does not apply to AM stations (see the next page).
| 2 | Before auto presetting | |
|
| ||
|
| If any radio stations are preset before you start | |
1 | the auto preset procedure, they will be replaced | ||
with new presets. | |||
3 |
| ||
|
|
1
2
3
4
Press STANDBY/ON to turn on the unit.
Press FM/AM to display “FM.”
To improve the FM reception, adjust the antenna position.
Press EDIT/CLEAR/NO and turn MULTI JOG to display “AutoPre- set?”
Press MULTI JOG.
The confirmation message “AutoPre- set??” appears in the display.
5 Press MULTI JOG.
Auto presetting starts. It scans for the best signal quality radio stations starting from the lowest frequency and moving to the highest, then presets the selected radio stations to the channels sequentially, starting with 1.
You can preset up to 20 stations. The preset stations will be automatically sorted in frequency order.
Note
Auto presetting may store noise instead of a station with a clear signal to some preset channels, depending on your location. In such cases, erase the preset manually (see page 50).
If auto presetting is unsuccessful
Check the antenna (aerial) connection and position (see page 6).
If you have a power failure or disconnect the AC power cord (mains lead)
Memory will normally be preserved for three days after the power supply has stopped. If the data in memory has been erased, repeat auto presetting.
◆Customizing the preset channels
|
|
|
|
|
|
|
| The following additional functions are available: | |
|
|
| ||
|
|
| • Naming a preset channel (see page 52) | |
|
|
| • Erasing a preset channel (see page 50) | |
To stop auto presetting, press EDIT/ | • Copying the radio station in the selected channel to | |||
| another (see page 51). | |||
CLEAR/NO. |
| |||
|
| |||
|
|
|
|
|
18