Onkyo HT-R990 Speaker Distance, Speaker Configuration, Subwoofer, Center, Surround, Surround

Speaker Configuration

Speaker configuration settings only need to be changed if you are not using all of the speakers in this package.

Note

•These settings are not available in either of the following cases:

–a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 55).

–“HDMI Control(RIHD)” is set to “On” (➔ page 54) and you’re listening through your TV speakers.

■Subwoofer, Center, Surround, Surround

Back*1*2*3

`Yes

`No

■Front High*1*2*4

`Yes

`No

Note

*1	If the “Surround” setting is set to “No”, this setting cannot be
	selected.
*2	If the “Powered Zone 2” setting is set to “Yes”, this setting
	cannot be selected.
*3	If the “Front High” setting is set to “Yes”, this setting is
	automatically set to “No”.
*4	If the “Surround Back” setting is set to “Yes”, this setting is
	automatically set to “No”.

■Surround Back Ch

`1ch:

Select if only one surround back speaker L is connected.

`2ch:

Select if two (left and right) surround back speakers are connected.

Note

•If the “Surround Back” Setting is set to “No”, this setting cannot be selected.

En

■Wireless Front High, Wireless Surround Back, Wireless Subwoofer

When an optional unit is connected to the UNIVERSAL PORT jack on the AV receiver, the speaker setting menu may appear on screen.

`Yes:

The audio is output from the speakers connected to the wireless unit.

`No:

The audio is not output from the speakers connected to the wireless unit.

When the wireless unit is connected to the UNIVERSAL PORT jack on the AV receiver, you can select if you wish to output the audio from the speakers connected to the wireless unit.

Note

•If the “Front High” setting is set to “No”, “Wireless Front High” cannot be selected.

•If the “Surround Back” setting is set to “No”, “Wireless Surround Back” cannot be selected.

•If the “Subwoofer” setting is set to “No”, “Wireless Subwoofer” cannot be selected.

Speaker Distance

This setting is set automatically by Audyssey 2EQ Room Correction and Speaker Setup (➔ page 30).

Here you can specify the distance from each speaker to the listening position so that the sound from each speaker arrives at the listener’s ears as the sound designer intended.

■Unit

`feet:

Distances can be set in feet. Range: 1.0ft to 30.0ft in 1 foot steps.

`meters:

Distances can be set in meters. Range: 0.30m to 9.00m in 0.3 meter steps.

(The default setting varies from country to country.)

■Left, Front High Left, Center, Front High Right, Right, Surround Right, Surround Back Right, Surround Back Left, Surround Left, Subwoofer

`Specify the distance from each speaker to your listening position.

Note

•These settings are not available in either of the following cases:

–a pair of headphones is connected.

–the “Audio TV Out” setting is set to “On” (➔ page 55).

–“HDMI Control(RIHD)” is set to “On” (➔ page 54) and you’re listening through your TV speakers.

•Speakers that you set to “No” in the “Speaker Configuration” cannot be selected.

44