INSTALLATION
16
Connecting to a Receiver/Amplifier with Dolby Digital or DTS Decoder AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
Receiver/Amplifier with Dolby Digital or DTS Decoder
Optical In
Coaxial In
Connect one of these cables:
Optical Digital Audio Cable
Coaxial Digital Audio Cable
Method 6 – Digital Audio Connection
• Please use eith er a 75-Ohm coaxial digital audio cable with RCA-style connectors or an S/PDIF
optical digital audio cable to connect one of the digital audio outputs to the corresponding input
terminal on your A/V receiver. For the detailed setup of coaxial/optical signals, please refer to
page 61.
NOTE
• Due to bandwidth limitations, high resolution audio formats such as Dolby Digita l Plus,
Dolby TrueHD, DTS-HD High Resolution and DTS-HD Master Audio cannot be sent
through the coaxial or optical digital audio output. A reduced resolution version of the
same audio track will be output instead. To listen to high resolution audio formats in
their best quality, please use the HDMI connection if you have a receiver that handles
HDMI audio (see page 14) or use the multi-channel analog outputs if you do not (see
page 15).
• Due to copyright restrictions, SACD audio cannot be sent through the coaxial or
optical digital audio output. To listen to SACD, please use the HDMI or analog audio
connections.
• Due to copyright restrictions and bandwidth limitations, full resolution audio from DVD-
Audio discs cannot be sent through the coaxial or optical digital audio output. To listen
to DVD-Audio in full resolution, please use the HDMI or analog audio connections.