OPPO Digital BDP-93 Custom Installation, External IR Infrared Remote Installation, RS232 Control

I N S T A L L A T I O N

Custom Installation

External IR (Infrared Remote) Installation

The OPPO BDP-93 Blu-Ray Disc Player features an IR IN port on its back panel. If the player is to be installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to ensure reliable operation.

Rear Panel

3.5mm Mono Cable

External IR Remote Sensor

NOTE

•When an external IR sensor is plugged in, the original IR sensor window on the front panel will be disabled.

•OPPO cannot guarantee that the IR IN port will be compatible with devices that are not manufactured by OPPO.

•The IR port on the BDP-93 is NOT compatible with the prior external IR Remote Sensor (IR-ES1) which is used with BDP-83.

•Connecting the IR IN port to an incompatible device may result in damage to the connected device or the player.

•Please contact OPPO customer support if you plan to integrate the player into an IR distribution system. Customer support can provide recommendations on how to properly connect the control signals.

IR IN Signal Identifications

3.5mm Mono Plug

Tip: IR carrier signal

Sleeve: Ground

RS232 Control

The BDP-93 has an RS232 control port and can be integrated into most custom home theater control systems. Please ask your custom installer to contact OPPO for the RS232 control protocol.

21