Probe Mount |
100% Set Point |
Probe Model |
Probe Length |
0% Set Point |
Level Offset |
Scaling |
3.4.2Firmware Version
The last two parameters in the TRANSDUCER block show the firmware version of the transmitter.
FIRMWARE_VERSION: displays the version of the firmware.
COPROCESSOR_VERSION: displays the version of the coprocessor.
3.5Analog Input Block
The ANALOG INPUT (AI) block takes the transducer blocks input data, selected by channel number, and makes it available to other function blocks at its output:
Channels
1.Level
2.Interface Level
3.5.1AI Block Parameters
PV: Either the primary analog value for use in executing the function, or a process value associated with it.
OUT: The primary analog value calculated as a result of executing the function block.
SIMULATE: Allows the transducer analog input or output to the block to be manually supplied when simulate is enabled. When simulate is disabled, the simulate value and status track the actual value and status
XD_SCALE: The high and low scale values, engineering units code, and number of digits to the right of the decimal point used with the value obtained from the transducer for a specified channel.
OUT_SCALE: The high and low scale values, engineering units code, and number of digits to the right of the decimal point to be used in displaying the OUT parameter.
GRANT_DENY: Options for controlling access of host computers and local control panels to operating, tuning, and alarm parameters of the block.
IO_OPTS: Option which the user may select to alter input and output block processing.
STATUS_OPTS: Options which the user may select in the block processing of status.
15 |
