Pacific Digital MF-810S user manual Using the Removable Stand, Power-on Initialization

Warning! Plugging the North American plug into locations outside of North America that use 240 VAC 50 Hz will damage unit and void warranty. European models are available for 220V-240V countries.

Pacific Digital offers an international external power supply for use outside of North America.

4.5Using the Removable Stand

The removable stand is designed to properly support the MemoryFrame in either portrait (vertical) or landscape (horizontal) orientations. The stand is designed to support MemoryFrame on flat surfaces only.

Insert the Stand into the rear of the MemoryFrame, and rotate to the orientation that you prefer, and set the MemoryFrame on a flat surface. See Figure 2 below. To wall-mount the unit, remove the stand by rotating out.

Figure 2 – Removable Stand

4.6Power-on Initialization

Move the MemoryFrame’s Power Switch to the “ON” position to turn on the MemoryFrame.

Important Note: In the power-on sequence of the MemoryFrame, its initialization screen will take a few moments to appear. The entire power-on sequence may take several minutes and you will be unable to use the push-button menu system until the initialization screen is replaced by the first photo appearing on the screen.

Copyright© 2002-2003 Pacific Digital Corporation Page 7