Onboard Memory:

32 MB RAM & 20MB Flash memory

PC Interface:

USB 1.1 Target interface

Monitor Output:

VGA D-sub 15 pin (MF-810S only)

Audio Jack:

Stereo audio jack 3.5mm (MF-810S only)

Audio Format:

WAV (MF-810S only)

AC Adapter:

North America: 120 VAC, 60 Hz, 17w

 

Europe: 220-240 VAC, 50 Hz, 17w

Dimensions:

10 x 11.75 x 2 in

 

(254 x 298 x 51 mm) (w/h/d)

Weight/Mass:

62 oz. (1761g)

Environment:

32 – 85 0F, 0-30 OC,

 

30-80% RH (non-condensing)

Accessories:

USB cable, software CD-ROM, wood frame

13.1Federal Communications Commission Statement

Instructions to User: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, contact the manufacturer. The user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

Copyright© 2002-2003 Pacific Digital Corporation

Page 57

Page 60
Image 60
Pacific Digital MF-810S user manual Federal Communications Commission Statement