Out Ref, Input, Hdref, Sdref | Panasonic AJ-HD150FE instruction

Setup menus

USER menu

<BASIC>

(continued)

Item

Setting

Description

No.

Superimposed

No.

Superimposed

display

display

030

HD

0000

59.94

This selects the HD frequency.

FREQUENCY

0001

60

0: The 59.94 Hz frequency is selected.

1: The 60 Hz frequency is selected.

The field frequency set here is used only when no signals

corresponding to the OUT REF setting are input. If the

corresponding signals are input, the field frequency matches

the field frequency of the input.

031

OUT REF

0000

AUT O

This selects the video output reference.

0001

INPUT

0: When

the HD REF input

signal is present, this

signal

0002

HD_REF

serves as the reference.

0003

SD_REF

When

the HD REF input signal is not present but the

SD

REF input signal is present, the SD REF signal serves as

the reference.

When neither the HD REF input signal nor SD REF input

signal

is present, the HD serial signal serves as the

reference.

When none of the HD REF input, SD REF input and HD

serial

signals are present,

the internal

sync signal serves

as the reference.

1: When

the HD serial input

signal is

present, this

signal

serves as the reference.

2: The signal which has been supplied to the HD REF IN

connector serves as the reference.

3: The signal which has been supplied to the SD REF IN

connector serves as the reference.

The underline on the setting item denotes the initial setting.

– 71 –

Image 71

Panasonic AJ-HD150FE operating instructions Out Ref, Input, Hdref, Sdref

Contents

Digital HD Video Cassette Recorder Operating Instructions ANY 13 AMP Socket For your safetyHow to replace the fuse Operating precaution Contents Features General and Features Channel high-sound-quality digital audio Menu-driven setupTime codes Multi-functional interfaces Front panel Controls and their functions Front Panel Top Section Front Panel Centre Section TAPE/EE switch Stop mode TC/CTL switchTC/UB switch INT/EXT switch Remote lamp REMOTE/LOCAL switchSHTL/SLOW switch Jog mode A IN/SET/OUT a OUT buttons Preroll buttonAuto Edit button PREVIEW/REVIEW buttons SCH lamp Counter display areaCassette inserted display lamp Dvcpro format 25 Mbps/50 Mbps cassette play display lamp ` Metre FULL/FINE selector switch Headphones jackVolume control Monitor Select switches Indicated on the Warning screen are the warning Front Panel Bottom SectionSET button Diag button Fuse holder Connector areaPower mains socket Signal GND terminal CUE OUT connector Time Code in connectorTime Code OUT connector CUE in connector Digital Audio IN/OUT connector ? SD REF in connectors and 75-ohm termination switchHD REF OUT connector SD REF OUT connector Registration method Operations using the front panel bottom controlsItems which can be registered Press it When registering setup menu itemsWhen registering VTR statuses Example of the menu displayed for registering VTR statuses Prog Menu 1 to 4 buttons Cancel buttonAre reset to the factory settings Cancel button This is for cancelling the reset operation Registered menu item displays Operations using the front panel top controlsVTR status displays Cancelling the change How to change a registered menu settingEntering the setting Menu item VTR status item tableName of registration Description of display Composite Video OUT3 Set the Control switch on the front panel to LocalConnections Tapes Cassette Switching on the power/inserting the cassette Lights and the tape stops travelling STOP/STAND by modeStill Timer Setting Level controls Pushed in unity value 1Selecting video/audio input signals2Adjusting the audio level Recording Playback Jog/shuttle Jog mode Shuttle mode For insert editing Select the editing modeManual editing Select the editing channel Preroll Deck to deck Automatic editing Set the Power switch to on Switch settings and adjustmentsWhen the unit is used as the recorder When the unit is used as the player Selecting the editing mode Negative duration function Entering the edit pointsMatch frame processing function Calculating the duration Checking the edit points Modifying the edit points 1Resetting both the edit in and OUT points2Resetting either the edit in or OUT point Preview Auto tag editing Executing automatic editingPostroll Retry function Review Modifying the edit points Audio split editingEntering the edit points Deleting the edit points Operations Displaying the audio split edit pointsCueing up the tape to the edit points Duration display Expansion mode selection status Expansion mode execution using the MODE/SEL buttonExpansion mode selection status Normal mode Registering the cue points Selecting the Multi CUE modeMulti CUE function Editing channels Operations Mode displaySearch display Display mode selection mark Description of displays ¢ 1 on Search point and registration point operationsSearch point operations Example of LED display # CUE 7 # CUE Operations on the same selected page page Mode = ManuRegistering cue points # CUE ¢¢ appears as the registration pointer display Search operations When registering cue points using numbersResetting the registration points individually Deleting registered points IC Card IC Card mode selectionIC Card function Outline Displayed during the period of execution Description of DisplayExecute status Display F O M a Description of Operation3 4 File selection Variable memory function Variable memory playback operation procedureVariable memory mode selection Variable memory function Variable memory editing operation procedure Description of Menu Error LOG functionError LOG mode selection Setup menu No.015 Auto Step Time code display Operation mode displayDescription of Operations Are displayed SETUP-MENU Init SET YESPLAY/NOSTOP Setup default settingsChanging the settings Search dial should be used in jog mode if at all possible Each user file contains the following items Setup menusChanging the file System User Press the Menu button Setting and releasing the lock mode Except No. A00 Load and No. A01 Save Settings can be lockedLoading a user file Turn the search dial and move the cursor Saving a user file Automatic loading of user file when the power is turned on System menu Setting DescriptionVideo output signal adjustments Control matrix of the adjustments is shown below SDI SYS SYS HSYS SC VO SYS Menu + The audio output phase is delayed from the video output0100 0200 100 Basic User menu DMY DisplayYMD MDY Manual Dvcam Format in tape playbackSYS Format Manual Sdref OUT REFInput Hdref Operation Memory stop function Lamp FRZ ModeSOF&EJ REC INH Mode Rota Mode Interface Port Local 50PMaster IN/OUT Edit Setting Edit JOG FWDJOG REV Postroll Rplcec RPLCE4CH1+CH2 Tape Protect Time Code Vaux video auxiliary data area SBC sub code data area Video Video OUT ENHHD SDI OUT SD SDI OUT Video OUT AUT O ADD22LADD21L ADD20L Line Audio AES Digi CH8 CH5CH6 CH7 MIX L CH1 CUEFade AUD Linear Moni SEL Moni CHAUTO11 MON Auto AUD VR REC PT Menu Alone. In addition, Time code/user bitTime code User bit Recording internal/external time codes Setting the internal time codeSetting the external time code TC switch Reproducing the time code/user bit Place the unit in the stop mode Set the TC/CTL button to TC Display position Operation modeSuperimpose screen Characters displayed Monitor output channel Recording track Recording signalAudio recording channel and monitor output selection Audio recording channel Rack-mounting adapters Rack mounting Condensation Video head cleaningMaintenance This display the VTR information Error messagesDiag menu Displaying the Diag menu Priority Monitor display Displaying the Hours Meter informationItem No Description Priority Display Description Eject Table of Auto OFF Error messagesCounter display Monitor display Stop Is detected or if an abnormal current flowing to ForIf the supply reel motor should rotate at an abnormally If an abnormal torque applied to the supply reel motor Introduction Hardware specificationsExternal interface specifications RS-232C interface Communication parametres Software specificationsOutline of send procedure from controller Protocol ACK Error code tableWhen the communication has terminated abnormally Nack Return format VTR Operation Message Command tableCommands relating to operation control Notes Supplementary notes OFF Standby STX OBN ETX STX OSR ETXReverse Standby STX OBF ETX Operation Commands relating to inquiries NotesSend command CLS Microsoft QuickBASIC sample programme Signal Pin No Connector signalsPin No. Signal Pin No Signal Pin No SignalRS-232C Remote 25-pin D-SUB crossover cable supported Impedance SW Printed circuit boardF1 board Audio Input This sets the CH1 audio input YES SpecificationsVideo input connector Video Output Connector Cue Track Audio Input ConnectorAudio Output Connector Digital Audio Hagenauer Str , 65203 Wiesbaden-Biebrich Deutschland Tel Panasonic Broadcast EuropePanasonic Broadcast Europe GmbH