Panasonic AJ-HD150FE Moni CH, AUTO11, MON Auto, Moni SEL, ON1, Audio PB, ANA CH1, ANA CH2

Setup menus

USER menu

<AUDIO>		(continued)
		Item	Setting
						Description
No.	Superimposed		No.	Superimposed
		display		display
745		MONI CH	0000		MANU	This selects the monitor output.
		SEL	0001		AUTO1	0: The output is as selected in MONITOR SELECT.
			0002		AUTO2	1: The cue signal is automatically output in all tape modes
			0003		AUTO11	except that PCM AUDIO is output over the –1 to +1 range.
			0004		AUTO21	2: The cue signal is automatically output in all tape modes
						except in the play mode in which PCM AUDIO is output.
						3: The cue input signal is automatically output when the unit is
						in the EE mode in addition to AUTO1.
						4: The cue input signal is automatically output when the unit is
						in the EE mode in addition to AUTO2.
746		MON AUTO	0000		L/R	If a setting other than MANU has	been selected for setup
		SEL	0001		L	menu item No.745 (MONI CH SEL), the CUE signal is
			0002		R	automatically sent to the monitor	output in accordance with
						the operation mode but this item selects the monitor channel
						which will be automatically switched to CUE.
						0: The CUE signal is output to both the left and right channels.
						1: The CUE signal is output to the left channel only.
						2: The CUE signal is output to the right channel only.
747		MONI SEL	0000		OFF	This selects whether to enable	or disable the MONITOR
		INH	0001		ON	SELECT button on the front panel.
			0002		ON1	0: The button’s operation is enabled.
						1: The button’s operation is disabled.
						2: In the FULL display mode, the button’s operation is
						disabled; operation is enabled in the FINE display mode
						only.
748		AUDIO PB	0000		DIS	This selects whether the playback level controls are to work in
		VR	0001		ENA	the EE mode when INT SG has been selected as the setup
						menu item No.700 (AUDIO IN SEL) setting.
						0: The INT SG output level is fixed at UNITY.
						1: The INT SG output level can be varied using the playback
						level controls.
						<Notes>
						• When 0 (DIS) is selected in setup menu No.760 (AUDIO
						VRCONT), the output level of INT SG is fixed at UNITY
						irrespective of the present setting.
						• When 2 (MUTE) is selected in setup menu No.760 (AUDIO
						VRCONT), the output level of INT SG is muted irrespective
						of the present setting.
749		ANA CH1	0000		CH1	This selects the signals to be output to analogue output CH1.
		SEL	0001		CH5	0: The CH1 signals are output.
						1: The CH5 signals are output	.
750		ANA CH2	0000		CH2	This selects the signals to be output to analogue output CH2.
		SEL	0001		CH6	0: The CH2 signals are output.
						1: The CH6 signals are output	.
751		ANA CH3	0000		CH3	This selects the signals to be output to analogue output CH3.
		SEL	0001		CH7	0: The CH3 signals are output.
						1: The CH7 signals are output	.
752		ANA CH4	0000		CH4	This selects the signals to be output to analogue output CH4.
		SEL	0001		CH8	0: The CH4 signals are output.
						1: The CH8 signals are output	.
753		SD SDI CH1	0000		CH1	This selects the signals to be output to SDI output CH1.
		SEL	0001		CH5	0: The CH1 signals are output.
						1: The CH5 signals are output	.
754		SD SDI CH2	0000		CH2	This selects the signals to be output to SDI output CH2.
		SEL	0001		CH6	0: The CH2 signals are output.
						1: The CH6 signals are output	.

The underline on the setting item denotes the initial setting.

– 94 –