Panasonic AJ-HD150FE Front Panel Bottom Section, SET button, Diag button, Exit button

Controls and their functions

<Front Panel Bottom Section>

eSET button

When this is pressed, the data which has been set on the setup menu is entered. After data entry, the setup menu setting mode is exited and the original operating mode is restored.

fDIAG button

When this is pressed, VTR information is displayed on-screen. When it is pressed again, the original display is restored.

There are two types of VTR information: “HOURS METER” information and “WARNING” information. Switching between these types is enabled by pressing the search button. Indicated on the “HOURS METER” screen are the power-on time, drum rotation time, tape travel time, loading count and power ON/OFF time, etc.

Indicated on the “WARNING” screen are the warning.

gMODE/SEL button

This is used to initiate a MULTI CUE operation or other expansion mode operation. For details, refer to page 47.

hEXIT button

This is used to exit from the MULTI CUE operation or other expansion mode operation and return to the original mode.

– 15 –