Panasonic AJ-HD150FE operating instructions Memory stop function

Setup menus

USER menu

<OPERATION>			(continued)
		Item		Setting
								Description
No.		Superimposed		No.	Superimposed
		display				display
107		EE MODE		0000			NORMAL	This selects the EE mode output signals.
		SEL		0001			THRU	0: Signals are output with a delay equivalent to the length of
								internal signal processing.
								1: Signals are output directly, without internal processing, and
								so are output with no delay.
								<Note>
								When editing mode is selected, SDTI is selected as the video
								input signal (when the optional board AJ-UDC150AP has
								been installed), or INT SG is selected at either VIDEO or
								AUDIO, he internal operations are forcibly set to NORMAL.
108		PLAY		0000		0		This set the play delay time in frame increments.
		DELAY		:			:
				0015		15
109		CAP.LOCK		0000			2F	This selects whether the playback framing is to be locked in 4-
				0001			4F	field or 2-field increments.
								0: 2F mode
								1: 4F mode
110		AUTO REW		0000			OFF	This selects whether to rewind the tape automatically to the
				0001			ON	tape start when the tape end is detected.
								0: The tape stops at the tape end.
								1: The tape is rewound to the tape start.
111	MEMORY			0000			OFF	This selects whether the VTR is to stop automatically when
		STOP		0001			ON	the counter value reaches “0” during a fast forwarding or
								rewinding operation in the CTL mode.
								0: The VTR does not stop.
								1: The VTR stops automatically.
								<Notes>
								1. The stop mode concerned is either the stop or the still-
								picture (SHTL STILL) mode depending on the setup menu
								No. 315 (AFTER CUE-UP) setting.
								2. When both the AUTO REW function and MEMORY function
								have been selected at the same time, the AUTO REW
								function takes precedence.

The underline on the setting item denotes the initial setting.

Memory stop function

The MEMORY STOP function does not work if it is

activated within a range of 0 ± 2 frames.

FWD direction

	Zero
	point
3 REW button	1	FF button
4 FF button		2 REW button

!When the FF button is pressed, the VTR performs the regular fast forward operation since the zero point is not located in the

direction of operation.

@When the REW button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

#When the REW button is pressed, the VTR performs the regular rewinding operation since the zero point is not located in the direction of operation.

$When the FF button is pressed, the PREROLL lamp lights (the SHTL lamp lights as well), the VTR proceeds with the preroll operation, and it automatically stops when it reaches the position where the counter reads “0.”

– 73 –