Dealing with Problems
Troubleshooting
Starting Up
Check to see if a fully charged battery pack is properly | |||||||
Or, there is no display | installed. |
| |||||
when | The power does not go on unless the AC adaptor is con- | ||||||
| nected: |
| |||||
| The battery level is too low. Charge the battery with the | ||||||
| AC adaptor. (Make sure that the battery never discharges | ||||||
| completely and that it is charged periodically.) |
| |||||
| Push the reset switch to restart |
| |||||
| Slide the latch to lock the | Latch | |||||
| battery pack cover all the |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| way to the left. |
|
|
|
|
|
|
| If the power does not turn on when the above operations | ||||||
| are performed, the battery pack must be replaced. |
| |||||
The date and time are in- | You can set the date and time through [Clock] in |
| |||||
correct. | - [Settings] - [System] tab. |
| |||||
| If you continue to experience problems, the backup | ||||||
| battery maintaining the clock may need to be replaced. | ||||||
| Contact Panasonic Technical Support. |
| |||||
| This computer will not correctly recognize the date and | ||||||
| time starting from the year 2085 A.D. |
| |||||
CF-P1 shuts down auto- matically.
The battery level may be too low. If the battery level goes below a certain threshold,
The computer may have entered a locked state. If this is the case, connect the AC adaptor and push the reset switch. Check the remaining battery level and make sure that multiple applications are not running simultaneously. Close all applications that are not being used.
The data cannot be copied. | The computer may be turned off automatically while the | |
| data is being copied by beams or when using File Ex- | |
| plorer. To prevent this, change the time setting to a longer | |
| time in | - [Settings] - [System] tab - [Power] - [Ad- |
| vanced] tab. |
|
Alarm and Auto backup do not operate according to settings.
It is possible that you were using 10 MB or more of stor- age memory, and that the power was turned off soon af- ter making settings. In this case, wait a few minutes be- fore turning off the computer.
44
