Panasonic CU-KE36NKU, CU-KE30NKU, CS-KE36NKU Names Of Parts, Unit Display And Operation Button

NAMES OF PARTS

Air Intakes

INDOOR UNIT

Air Outlet

Remote Controller

Drain Hose

Refrigerant Tubes

OUTDOOR UNIT

Air Outlet

NOTE

This illustration is based on the external view of a standard model. Consequently, the shape may differ from that of the air conditioner which you have selected.

This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote controller.

Air Intake	Air from the room is drawn into this section and
	passes through air filters which remove dust.
Air Outlet	Conditioned air is blown out of the air
	conditioner through the air outlet.
Remote	The remote controller controls power ON/OFF,
Controller	operation mode selection, temperature, fan
	speed, timer setting, and air sweeping.
Refrigerant	The indoor and outdoor units are connected by
Tubes	copper tubes through which refrigerant gas
	flows.
Drain Hose	Moisture in the room condenses and drains off
	through this hose.
Outdoor	The outdoor unit contains the compressor, fan
(Condensing)	motor, heat exchanger coil, and other electrical
Unit	components.

UNIT DISPLAY AND OPERATION BUTTON

INDOOR UNIT

OPERATION lamp

TIMER lamp

REMOTE CONTROL receiver

OPERATION button (ON/OFF)

IMPORTANT

Avoid using radio equipment such as mobile phone near (within 4 ft. (1.2 m)) the remote control receiver. Some radio equipment may cause malfunction of the unit.

If the trouble happens, disconnect power and restart the air conditioner after a few minutes.

REMOTE	This section picks up infrared signals from the
CONTROL	remote controller (transmitter).
receiver
OPERATION	When the remote controller cannot be used,
button	pressing this button enables heating and
	cooling operation.
	Each time this button is pressed, the type of
	operation conducted is indicated by the
	changing color of the OPERATION lamp. Press
	the button and select the lamp color that suits
	your preference for operation.
	Cooling	Heating	Stop
	operation	operation
			(lamp off)
	(green)	(red)
OPERATION	This lamp lights when the system is in the
lamp	continuous AUTO (red or green), HEAT (red),
	DRY (orange), COOL (green) and FAN (green)
	mode.
	The OPERATION lamp lights up red and orange
	alternately when the system is defrosting.
TIMER lamp	This lamp lights when the system is being
	controlled by the timer.
NOTE

The unit’s display lamps are dimmed during operation in the NIGHT SETBACK mode.

4