Panasonic CS-KE30NKU, CU-KE36NKU HIGH POWER Mode, UNOCCUPIED Mode, Unoccupied Indication, Status

7. HIGH POWER Mode

HIGH POWER mode can be used to increase the output of the indoor unit for all operation modes except automatic operation.

Press the HIGH POWER button while unit is operating.

The mark appears in the display.

To cancel, press HIGH POWER button again.

•When the HIGH POWER button is pressed, the unit operates at maximum output for 30 minutes, regardless of the desired temperature. The fan speed is 1 step above “High”.

•HIGH POWER Mode cannot be used when the operation mode is in Automatic Operation.

•QUIET Mode and HIGH POWER Mode cannot be used at the same time.

NOTE

•Pressing the MODE selector button cancels HIGH POWER mode.

•When set to High fan speed during heating operation, the fan runs

at High fan speed even though the mark is displayed.

•Depending on the operating conditions, the fan speed may be increased by a small amount only.

8. UNOCCUPIED Mode

Unoccupied mode is used to prevent the room temperature from decreasing too much (or increasing too much) when no one is in the room, and operates automatically to save energy.

Press the UNOCCUPIED button.

The mark appears in the display.

To release the unoccupied function, press the UNOCCUPIED button again.

Unoccupied Indication

Unoccupied	Unoccupied	Status
Function	Indication
OFF	no display	The unoccupied function is not set.
		The unoccupied function is now
		being set, and under Heating (or
	flashing	Cooling) operation.
ON
		Although the unoccupied function is
		set, not under Heating (or Cooling)
	lighting	operation.

NOTE

Even if Unoccupied Mode is ON, it will be disabled if the air conditioner is in operation.

•Unoccupied Function can be set and released through all operational modes, regardless of whether the air conditioner is operating or not.

•If the Unoccupied Function is ON and the remote controller is used to turn the air conditioner OFF (including OFF TIMER), the air conditioner will turn off, but depending on the room temperature, Heating or Cooling Operation will automatically begin.

•When the Unoccupied Function is in operation and the ON/OFF operation button is pressed, operation will restart based on the settings input before the air conditioner was turned off.

11