Panasonic CS-KE36NKU, CU-KE36NKU Wiring Instructions for Inter-unitConnections, Fig, a, b

3-8. Wiring Instructions for Inter-unit Connections

(1) Insert the inter-unit wiring (according to local codes)

into the through-the-wall PVC pipe. Run the wiring

toward the indoor side allowing approx. 10" (25 cm)

to extend from the wall face. (Fig. 24)

(2) Grasp both ends of the front panel, push the arms

towards the outside, and remove the front panel by

opening it towards the front and pulling it towards

you. If the front panel is difficult to remove, grasp

both ends of it and lift it up slightly. Move it to the left

and disengage the left arm, then move it to the right

",(8	'(22
6(4,2

2(9:0* *5<,8

'0804.

  
*3

	and disengage the right arm.
(3)	Remove the screw on the right side cover plate and
	open the cover. (Fig. 25)
(4)	Route the inter-unit wiring from the back of the
	indoor unit and pull it toward the front for connec-
	tion. (Fig. 26a, 26b)
(5)	Connect the inter-unit wiring to the corresponding
	terminals on the terminal plate (Fig. 26a, 26b) while
	referring to the wiring diagram.
(6)	Be sure to secure the wiring with the provided
	clamp.

NOTE

When closing the front panel, push the central part of the front panel first and then press the bottom right and left corners in place until you feel a click. (Fig. 27)

Please refer to “How to replace the grille” on page 15 for installing the air intake grille.

Fig. 27

Fig. 24

Cover

Fig. 25

$,8304(2
62(:,

Fig. 26a

4:,8;40: =0804.

(8:/
62(:,

Fig. 26b

$56
5-
*54+;0: *544,*:58

5*1
4;:

18