Changing the place name information to be recorded
When there are other candidate locations as a result of positioning, you can change the location information to another place name or landmark in the neighborhood.
•When there is a choice for differing place name information, 
appears in front of the place name information.
•You can also perform this operation by touching [GPS Area Select] after touching the GPS icon.
Press [MENU/SET]
Use cursor button to select [GPS] menu and press [MENU/SET]
Use cursor button to select [GPS Area Select] and press [MENU/SET]
Use cursor button to select an item to be changed and press [MENU/SET]
Use cursor button to select a place name or landmark from the displayed candidates and press [MENU/SET]
■If you do not want to record a place name or landmark
When you select [Delete all 
above, the place names and landmarks are not recorded.
•Note, however, that the latitude and longitude data are recorded. If you do not want to record the latitude and longitude data, set [GPS Setting] to [OFF].
•To restore the place names and landmarks that you set not to be recorded, perform the [GPS Area Select] procedure again.
●A landmark may not be displayed at all or a different landmark may be displayed in places such as a large park. If the landmark that you want cannot be selected using [GPS Area Select], perform the [My Landmark] procedure (→153) before recording a picture or the [Edit Place Name] procedure after recording a picture. (→139)
