Viewing on TV screen

To switch the playback method for the still pictures recorded in 3D

Select the picture recorded in 3D

Select [2D/3D Settings] on the [Playback Mode] menu and then press [MENU/SET] (→111)

Playback method will switch to 3D if it is playing back in 2D (conventional image), or it will switch to 2D if it is playing back in 3D.

If you feel tired, uncomfortable or otherwise strange when playing back pictures recorded in 3D, set to 2D.

On the LCD monitor of this camera, 3D still pictures will be played back in 2D (conventional pictures).

If you switch between 3D still pictures and normal still pictures while playing back pictures, a black screen will be displayed for a few seconds.

If you select a thumbnail of 3D still pictures or display a thumbnail after playing back 3D still pictures, it may take a few seconds to start playing back or displaying the pictures.

Viewing 3D still pictures too close to a TV may cause eyestrain.

When a TV has not been converted for viewing 3D still pictures, do necessary preparation on the TV. (For details about the necessary preparation of the TV, read the manual for the TV.)

When an image is not suitable for 3D viewing (due to excessive parallax, etc.)

During Slide Show playback: The image is displayed in 2D.

During [Filtering Play]: A message appears confirming whether to display the image in 3D or not.

When a 3D image is played back on a TV that is not 3D-capable, 2 pictures may appear side-by-side on the screen.

You can store 3D still pictures on a computer or Panasonic recorder. (→162)

- 161 -

Page 161
Image 161
Panasonic DMC-ZS19, DMC-ZS20, DMCZS20K, M0112KZ0, VQT4B93 owner manual 161