Charging battery

Charging lamp indications On: Charging in progress

Off: Charging stops (After charging stops, disconnect the camera from the electrical outlet or your computer.)

Notes on charging time

When using the AC adaptor (supplied)

Charging time

Approx. 260 min

The charging time indicated above is the time required for charging in case when the battery is completely used up. The time required for charging differs depending on conditions of battery usage. Charging takes longer in cases when temperatures are either high or low and when the battery has not been used for a long period of time.

The time required for charging through the computer varies depending on the specifications of the computer.

Do not use any other USB connection cables except the supplied one. Doing so may cause malfunction of the camera.

Do not use a USB extension cable.

The AC adaptor (supplied) and the USB connection cable (supplied) are dedicated accessories of this camera. Do not use it for other devices.

If there is any trouble related to the electrical outlet (i.e. power failure), charging may not complete properly. Disconnect the USB connection cable (supplied) and reconnect it to the camera.

If the charging lamp does not light or flash even when the camera is properly connected to the AC adaptor (supplied) or your computer, charging has been put in pause status because the temperature is not in the appropriate range for charging. This is not a malfunction. Reconnect the USB connection cable (supplied) and retry charging in

a place where ambient temperature is 10 °C to 30 °C (50 °F to 86 °F) (temperature conditions also apply to the battery itself).

Remaining battery

Remaining battery

(flashes red)

If the battery mark flashes red, recharge or replace battery.

- 16 -

Page 16
Image 16
Panasonic DMC-ZS19, DMC-ZS20, DMCZS20K, M0112KZ0, VQT4B93 owner manual Remaining battery