- 92 -
Useful features for travel
[Travel Date]
• For [Setup] menu setting procedures (→51)
If you set your travel schedule and record pictures, the day of your trip on which the
picture was taken will be recorded.
■Recording mode: ∗
∗ Recording only. (Cannot set.)
Select [Travel Date] from the [Setup] menu (→51)
Use cursor button to select [Travel Setup] and press
[MENU/SET]
Use cursor button to select [SET] and press [MENU/SET]
Use cursor button to select the departure date and press
[MENU/SET]
Use cursor button to select the return date and press
[MENU/SET]

■To record [Location]

Once the [Travel Setup] is set, you can set the location.
Select [Location] in step above
Use cursor button to select [SET] and press [MENU/SET]
Enter your location (Entering text →94)

●The travel date is calculated from the set departure date and the date set in the

camera’s clock. When destination is set in [World Time], days elapsed are calculated
based on local destination time.

●When [Travel Setup] is set to [OFF], the number of days elapsed is not recorded. It is

not displayed even if [Travel Setup] is set to [SET] after recording.

●If settings are made before departure date, number of days to departure are not

recorded.

●[Location] is recorded separately from the location name information which is recorded

on the pictures by the GPS function. DMC-ZS20

●To print [Location] or the number of days that have passed, either use [Text Stamp] or

print using the “PHOTOfunSTUDIO” software on the supplied disc.

●[Travel Date] cannot be set for AVCHD motion pictures recorded when [Rec Quality] is

set to [PSH], [FSH] or [SH].