Setting menu screens VTR MAIN MENU (continued)

MIC/AUDIO screen

Item

Variable

VF

 

Remarks

range

display

 

 

 

 

 

 

 

 

MIC LOWCUT

FRONT

USER

For setting the high-pass

CH1

REAR

ENG

filter for the CH1 mic input.

 

F&R

 

FRONT:The high-pass filter

 

OFF

 

 

for the front mic

 

 

 

 

input is set to ON.

 

 

 

REAR: The high-pass filter

 

 

 

 

for the rear mic

 

 

 

 

input is set to ON.

 

 

 

F&R:

The high-pass

 

 

 

 

filters for both the

 

 

 

 

front and rear mic

 

 

 

 

inputs are set to

 

 

 

 

ON.

 

 

 

OFF:

The high-pass filter

 

 

 

 

for the CH1 input is

C U F

 

 

 

set to OFF.

 

 

 

 

MIC LOWCUT

FRONT

USER

For setting the high-pass

CH2

REAR

ENG

filter for the CH2 mic input.

 

F&R

 

FRONT:The high-pass filter

 

OFF

 

 

for the front mic

 

 

 

 

input is set to ON.

 

 

 

REAR: The high-pass filter

 

 

 

 

for the rear mic

 

 

 

 

input is set to ON.

 

 

 

F&R:

The high-pass

 

 

 

 

filters for both the

 

 

 

 

front and rear mic

 

 

 

 

inputs are set to

 

 

 

 

ON.

 

 

 

OFF:

The high-pass filter

 

 

 

 

for the CH2 input is

C U F

 

 

 

set to OFF.

 

 

 

 

LIMITER

ON

USER

For switching the audio

 

OFF

ENG

limiter to ON or OFF.

 

 

 

ON : The limiter operates.

 

 

 

OFF : The limiter does not

C U F

 

 

operate.

 

 

 

 

TEST TONE

NORMAL

USER

NORMAL:

 

ALWAYS

ENG

The test tone signal is

 

OFF

 

output when the AUDIO

 

CHSEL

 

IN switch for CH1 is set

 

 

 

to front while BAR is

 

 

 

selected as the

 

 

 

CAM/BAR switch setting.

 

 

 

ALWAYS:

 

 

 

The test tone signal is

 

 

 

always output when BAR

 

 

 

is selected as the

 

 

 

CAM/BAR switch setting.

 

 

 

OFF:

 

 

 

 

The test tone signal is

 

 

 

not output.

 

 

 

CHSEL:

 

 

 

 

The test tone signal is

 

 

 

output for the selected

 

 

 

channel when the

 

 

 

AUDIO IN switch CH1 or

 

 

 

CH2 is set to front while

 

 

 

BAR is selected as the

C U F

 

 

CAM/BAR switch setting.

<Note>

The frequency characteristics in the MIC LOWCUT ON mode are 200 Hz to 10 kHz.

Item

Variable

VF

Remarks

range

display

 

 

 

 

 

 

CUE SELECT

SIDE SW

USER

For setting the audio

 

CH1

ENG

signals to be recorded on

 

CH2

 

the cue track.

 

MIX

 

SIDE SW:

 

 

 

The signals selected by

 

 

 

the CUE switch on the

 

 

 

side panel are recorded.

 

 

 

CH1:

 

 

 

The CH1 signals are

 

 

 

recorded.

 

 

 

CH2:

 

 

 

The CH2 signals are

 

 

 

recorded.

 

 

 

MIX:

 

 

 

The CH1 and CH2

 

 

 

mixed signals are

C U F

 

 

recorded.

 

 

 

 

EMBEDDED

ON

USER

For setting whether the

AUDIO (60 Hz)

OFF

ENG

embedded audio signals

 

 

 

are to be output to the HD

 

 

 

SDI MON connector and

 

 

 

HD SDI EE connector

 

 

 

when 60.00 Hz has been

 

 

 

selected as the frame

 

 

 

frequency setting.

 

 

 

ON : The embedded

 

 

 

audio signals are

 

 

 

output.

 

 

 

OFF : The embedded

 

 

 

audio signals are not

C U F

 

 

output.

 

 

 

 

 

 

 

A/V SYNCHRO

ON

USER

At low frame rates, the

 

OFF

ENG

images lag behind the

 

 

 

sound. This item is used

 

 

 

to select whether this lag

 

 

 

is to be adjusted.

 

 

 

ON:

 

 

 

The lag is adjusted so

 

 

 

that the timing of the

 

 

 

images is more or less

 

 

 

in synchronization with

 

 

 

the timing of the sound.

 

 

 

OFF:

 

 

 

The lag is not adjusted.

 

 

 

The same operations as

 

 

 

in previous models are

C U F

 

 

performed.

 

 

 

 

<Notes>

OWhen ON has been selected as the A/V SYNCHRO item setting, noise may be carried on the audio signals at those moments when the frame rate is switched.

OThe timing of the images and the timing of the sound are fixed while recording is in progress. This means that these two timings may not be in synchronization when the frame rate is switched during recoding even when ON has been selected as the A/V SYNCHRO item setting.

OAt frame rates of 12P and less, it is not possible for the timing of the images and the timing of the sound to be in synchronization even when ON has been selected as the A/V SYNCHRO item setting. The 12P timing will be fixed.

The underlining in the variable range column indicates the setting in the preset mode.

120