Panasonic HDC27H Displays relating to time codes, Displays relating to errors and warnings, Remaining battery charge and audio channel level and remaining tape displays

Screen displays

Remaining battery charge and audio channel level and remaining tape displays

Remaining tape display

The remaining tape time is displayed using 7 segments. The remaining tape time indicated by each segment is set to 3 minutes or 5 minutes using TAPE REMAIN/ $ on the VTR MENU “BATTERY/TAPE” screen. Each time the number of minutes set for the segments elapses, one segment is cleared. (See page 117)

DF SLAVE TCG HOLD		EMPHASIS
		0
h min s	frm	10
TAPE		20
E	F	30
BATT
		40
RF SERVO HUMID SLACK		CH1 -dBCH2

Remaining battery charge display

If a battery with a digital display (% display) is used, all 7 segments up to the “F” position light when the 70% or more of the battery charge remains.

When there is less than 70% of the battery charge remaining, the segments go out one by one in sequence every time the remaining charge drops by 10%.

Audio channel level meter

Displays relating to errors and warnings

Error code display

	DF SLAVE TCG HOLD
								EMPHASIS
									0
		h		min	s	frm				10
	TAPE
										20
	BATT		E				F		30
									40
	RF SERVO HUMID SLACK							CH1 -dBCH2
Warning displays
RF : Clogged video head

SERVO: Servo disturbance

HUMID : Formation of condensation on the head drum

SLACK: Problem in tape take-up

For details, refer to “Warning system” (pages 126 and 127).

Displays relating to time codes

These displays light for the time code, CTL and actual
time
DF	: Drop frame mode
SLAVE : External locking of the time code
HOLD	: Time code generator in the hold mode (when the
	HOLD button has been pressed)

DF SLAVE TCG HOLD		EMPHASIS
		0
h min s	frm	10
TAPE		20
E	F	30
BATT
		40
RF SERVO HUMID SLACK		CH1 -dBCH2

Time counter display

This displays the time code, CTL, user bits and actual time. For the correlation between the items displayed and the switches, refer to the next section.

Time code-related switch settings and display items

TCG switch	DISPLAY switch	Display item
position	position
	TC or CTL	Time code
SET
	UB	User bits
	CTL	CTL
F-RUN or R-RUN
	TC	Time code
	UB	User bits

<Note>

If the HOLD button is pressed while the DISPLAY switch is set to UB, “HOLD” on the counter display will flash for as long as the switch is held down, and the VITC user bits information recorded in the video AUX area will appear on the counter display.

51