Power supply (continued)
Using the Panasonic battery pack

1 Remove the battery holder.

2 Attaching the battery case to the unit.

1Connect the cable on the camera-recorder to the cable on the battery case (BP-90 type).

2Using a screwdriver, secure the battery case (BP-90 type) to the camera-recorder.

Open the cover and lift the rubber cap so that the screw tightening hole is visible. Tighten the screws to secure the battery case to the camera-recorder. Be sure to fully tighten the screws.

<Notes>

O Do not use excess force when lifting the rubber caps forcibly.

O Take special care not to pinch the cable.

3 Connect the plug on the battery pack to the connector inside the case, and insert the battery pack.

<Note>

Before connecting or disconnecting the plug, be absolutely sure to turn off the unit’s power.

4 Set the battery type.

Select the battery type using the BATTERY SELECT menu item. This item is selected from the <BATTERY/TAPE> screen.

For details, refer to “Setting menu screens” (page 117).

Connect

Battery case

(for BP-90 type)

23